Sawgrass Technologies, Inc. ChromaBlast™ Getting Started Guide for the EPSON Stylus C120/c110
8.Remove the yellow tape from the bottom of the ink cartridge.
9.Place the new ink cartridge
into the cartridge holder and push it down until it clicks into place.
10.Once you replace any other cartridges that need replacing, close the ink cartridge cover and press it until it clicks into place.
11.Close the printer cover.
12.Press the ink button. The printer begins printer begins charging ink and the power light starts flashing. This takes about 1 ½ minutes. When it’s finished, the power light stops flashing and remains on, and the ink light goes out.
Never turn off the printer while the power light is flashing or you’ll waste ink.
If the ink light stays on (not flashing), the ink cartridge may not be installed correctly. Press the ink button again and reinstall the ink cartridge until it clicks into place.
22