4Use your SoundBar
This section helps you use the SoundBar to play audio from connected devices.
Before you start
•Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/ support.
•Switch the SoundBar to the correct source for other devices.
Adjust the volume
1 Press +/- to increase or decrease a volume level.
•To mute sound, press 
(MUTE).
•To restore the sound, press 
(MUTE) again or press
»»All Source indicators on the main unit blink twice when a volume is set to the maximum or minimum value.
Choose your sound
This section helps you choose the ideal sound for your video or music.
Surround sound mode
Experience an immersive audio experience with surround sound modes.
1 Press SURR to select a surround mode.
•[Virtual Surround]: Creates a highly surround listening experience The SURR indicator on the main unit lights up.
•
Equalizer
Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.
1 Press TREBLE +/- or BASS +/- to change
the frequency.
• Press RESET to reset your treble/bass level to the default setting mode.
»»All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value.
MP3 player
Connect your MP3 player to play your audio files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable, connect the MP3 player to the
2 Press
3 Press the buttons on the MP3 player to select and play audio files or music.
USB storage devices
Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for FAT file systems, and complies with the Mass Storage Class.
• An MP3 or WMA file on a USB storage device
1 Connect a USB storage device to the SoundBar.
2 Press USB on the remote control.
»»The play starts after a few seconds.
8EN