In the case of RGB image signals
·Connect the projector ’s Computer #2 BNC Port to the video equipment with the component image cable (available on the open market).
·Connect the supplied RCA Audio Cable (Red/White) to the
To the audio output port L
(white)
To the audio output port R
(red)
| G/Y Port |
R/Cr/Pr Port | B/Cb/Pb Port |
| Audio Port (white) |
| Audio Port (red) |
To the R output port
To the G output port
To the B output port
For component images Cable (available on the open market)
RCA Audio Cable (supplied with the projector)
Point
·Purchase the component image cable so that one end matches the BCN type port on the projector and the other matches the port on the video equipment.
·Set the BNC parameter to [RGB] when the connection has been established. (see page 67)