Tracking Adjustments (when projecting computer images)
Adjusted when vertical stripes are apparent on the computer image.
1 Press the [Tracking +, -] button on the projector.
Sync.
g ni k c
a
r
T
T
r a c k i gn
Sy
nc.
Synchronization Adjustments (when projecting computer images)
Adjusted when flashing, blurring and vertical noise are apparent on the computer image.
1 Press the [Sync +, -] button on the projector.
Sync.
g ni k c
a
r
T
T
r a c k i gn
Sy
nc.
Calling out adjustment values (when projecting computer images)
It is possible to record preset adjustment values and call them out when required.
1 Press the [Preset] button on the remote control.
The
| Esc |
|
Menu | Help |
|
Comp1 | Comp2/YCbCr |
|
| Video |
|
Auto | Resize |
|
P in P | Preset |
|
- Volume + | Preset |
Point
·There are cases when these adjustments must be made again if the values output from the computer (resolution, display color) are amended after flashing and blurring have been adjusted.
·There are cases where flashing and blurring is caused by adjusting the brightness and contrast*.
·Images will be projected more vividly if synchronization adjustments are made after the tracking adjustments.
·Auto adjustments, tracking adjustments and synchronization adjustments are not possible if no image signals are being input by the computer, such as when projecting video images or displaying menus.
·The preset values must be registered beforehand. (see page 65)