Epson 9100 No sound, Remote control won’t work, Has the sound input been connected correctly?

Page 88

No sound

●Has the sound input been connected correctly?

see page 31, 35

● Has the image for which sound is required been selected?

see page 41

●Is sound being emitted from connected equipment? Confirm the sound from connected equipment, etc. Has the volume been turned right down?

see page 60

●Has the [A/V Mute] function been left on?

There is a possibility that the [A/V Mute] mode is in effect.

Press the [A/V Mute] button, adjust the volume, or display the menu to cancel the [A/V Mute] status.

see page 52

The remote control won’t work

Power

Freeze

A/V Mute

R/C ON

E-ZoomOFF

2

3

4

1

Enter

5

 

 

Esc

●Is the [R/C ON OFF] switch on the remote control on? see page 40

●Is the remote control being aimed in the correct direction?

The operable range of the remote control unit is 30° to the left and right, and 15° up and down.

see page 20

●Is the distance between the remote control and the projector too great?

The operable distance of the remote control unit is approximately 10m.

see page 20

●Is the remote control receiver connected and the remote control being aimed at the projector?

●Is the light-receiving area on the remote control blocked?

●Has the remote control light-receiving area been subject to direct sunlight, flourescent light or any other strong light source?

●Have the batteries been mounted in place? see page 21

●Have the batteries run out?

●Have the batteries been mounted back to front? see page 21

86 - When the Indicators Provide No Help

Page 87 Page 89
Image 88
Page 87 Page 89
Contents Troubleshooting Maintenance Others Accessory Verification Features Contents Connecting the video equipment Ending Adjusting the Projection PositionAdjusting the Projection Size Picture Quality AdjustmentP Function Volume Adjustment Menu Configuration Projection CuttingMenu Operations Introduction of Projector SoftwareInstallation TroubleshootingWhen the Indicators Provide No Help Replacing the Air FilterContents Symbol displays Using this manualUsing this manual Safety Precautions Safety PrecautionsNever look into the lens when the power is switched on Failure to observe this may result in the outbreak of fire Tasks Safety Precautions Parts, Names and Operations ProjectorFront Panel Parts, Names and OperationsBack Panel Rear PanelOperation Panel Video button seeChange-over Switch PortsRemote Control Zoom button see page 55Inside of the Cover ESC button see page 34Battery Cover Range of Remote Control Operations Operable distance Approximately 10 meters Operable rangeInserting the Remote Control Batteries Remove the Battery CoverInsert the batteries Replace the coverInstallation example Installation ProcedureInstallation Procedure Screen size and projection distance When viewing from the side Projection anglesConnecting the projector to a computer Connecting the projector to a computerEligible computers Conditions for eligible computersVgacga When the monitor port is the D-Sub 15 pin Case of the mini D-Sub 15 pinWhen the monitor port is 13w3 Case of 5BNC When connected to the second computer Case of DVI-D Connecting the computer to Computer #2 Connecting the computer to Computer #1Sound connection Connecting external monitors Connecting up the mouse wireless mouse function DOS/VEnter button Esc Mouse button Connecting the video equipment Case of composite image signalsCase of S image signals Connecting the video equipmentCase of component color differential* image signals Put sound from the projectors speakersCase of the digital tuners D output port Case of RGB image signals Plug the Power Plug into the power socket ProjectionPreparations ProjectionPress the Power button to turn on the power supply Commencing projectionBncrgb Starting projection Press the Power button Press the Power button once moreEnding EndingRestore the Front Foot if it has been extended Attach the lens coverFeet adjustments Adjusting the Projection PositionAdjusting the Projection Position Adjusting the Projection Size Zoom adjustmentTrapezoid adjustment Adjusting the Projection SizePicture Quality Adjustment Focus adjustmentAuto adjustment when projecting computer images Picture Quality AdjustmentTracking Adjustments when projecting computer images Synchronization Adjustments when projecting computer imagesPress the Preset button on the remote control Press the Tracking +, button on the projectorIntroduction of Functions Introduction of FunctionsHelp Function Useful FunctionsUseful Functions An image does not appear on the Screen Projection Cutting Mute FunctionFreeze Function Projection CuttingSwitching Image Sizes Switching Image SizesCase of computer images Press the Resize buttonCase of video images Enlarging Images E-zooming function Enlarging Images E-zooming functionPress the E-Zoom button Effect Function Cursor/StampBox Effect FunctionPress the 3 button SpotlightLower the Enter button to move the spotlight Canceling effects BarPress the 4 button to display the required cursor/stamp Press the 5 buttonP Function P FunctionPress the P in P button Press the Enter button to set the sub-screen displayVolume Adjustment Volume AdjustmentMenu Configuration Menu ConfigurationMenu items Menu itemsSound menu Effect menu Operation method Menu OperationsMenu Operations Select the parameter value Setting items Menu Operations BNC OFF Menu Operations User logo registration Confirmation screen will be displayedEnlargement setup screen will be displayed Introduction of Projector Software Outline of Projector SoftwareEMP Link Introduction of Projector SoftwareComputer Connections Serial ConnectionsWindows Computers Computer ConnectionsMacintosh Computers Installation InstallationOperating environment Windows Operating EnvironmentCase of Windows Start up Windows and set the CD-ROM in placeCase of the Macintosh Reading the User’s GuideSelect the language and click on the OK button Operation Indicator TroubleshootingTroubleshooting Lamp Indicator Temperature IndicatorPoint When the Indicators Provide No Help When the Indicators Provide No HelpImage is not projected Nothing is displayedMessages Has the Sync., Tracking and Position been adjusted? Image is unclearImage is cut up Large/Small Has the Position been adjusted?Has the cable length been extended? Image is dark Image color is badIs it time to replace the lamp? Remote control won’t work No soundHas the sound input been connected correctly? Has the image for which sound is required been selected?Cannot end after the Power button has been pressed EMP Link V will not functionCleaning the projector Cleaning the lensCleaning the Air Filter Replacement method Replacing the Air FilterReplacing the Air Filter Remove the Air FilterReplacing the Lamp Replacing the LampWithdraw the lamp Attach a new lampResetting the lamp illumination time Attach the FanPress the Help button for five or more consecutive seconds Select YesOptional Parts Optional PartsDVI-D/DVI-D When transporting repeatedely When carrying by handTransportation TransportationTerminology TerminologyTerminology Specifications SpecificationsImages Check SheetCheck Sheet Sound Audio2Computer2 Video RCA pin CompositeRemote control unit, wireless mouse, EMP-Link EMPWorld-Wide Warranty Terms World-Wide Warranty TermsEpson Support Center Austria Epson Support Center BeNeLuxRecro d.d Eprint s.r.oRepro Ljubljana d.o.o Excom Service AG Epson Italia s.p.aRomar Pazarlama Sanayi BS Procesor d.o.o Ve TIC. A.SEpson Argentina S.A Epson Chile S.A Epson Peru S.A Epson Technical Support Centre InformationIndex IndexIndex Index Window resizing 51 World-Wide Warranty Terms Zoom Zoom Ring Declaration of Conformity Epson AMERICA, INC FCC Compliance Statement For United States Users Seiko Epson Corporation 9001005

9100 specifications

The Epson 9100 is a formidable player in the realm of high-quality projectors, designed for both home theater enthusiasts and professional users. As one of Epson's flagship models, it stands out due to its impressive blend of advanced technologies, exceptional image quality, and a range of features tailored to enhance the viewing experience.

One of the standout features of the Epson 9100 is its use of 3LCD technology. This innovative system utilizes three individual LCD panels—one each for the primary colors: red, green, and blue. This design not only delivers vivid colors but also ensures a high level of brightness, making it ideal for various lighting conditions. Unlike certain DLP projectors, the 3LCD technology minimizes the risk of color wheel artifacts, resulting in rich and immersive visuals that captivate audiences.

The Epson 9100 supports 4K enhancement, providing stunningly sharp images that are crucial for modern content. This feature utilizes advanced pixel-shifting technology to produce 4K-like resolution, dramatically improving the clarity and detail of images, whether watching a movie, playing video games, or viewing presentations. The expanded resolution allows for a more extensive detail capture, enhancing overall immersion.

Moreover, the Epson 9100 boasts a remarkable color gamut, capable of producing a wide range of colors, thanks in part to its high dynamic contrast ratio. With an impressive brightness output, this projector can deliver vibrant images even in brightly lit rooms, ensuring versatility across different settings. The projector supports HDR (High Dynamic Range), enhancing the dynamic range of color and brightness, which brings out subtle details in bright and dark scenes alike.

Connectivity is another strongpoint of the Epson 9100, featuring an array of ports that accommodate various devices. From HDMI inputs for high-definition devices to USB ports for easy streaming and presentations, the projector is designed for convenience. Access to wireless connectivity options allows users to project content from smartphones or tablets without the need for cables.

The Epson 9100 also prioritizes user comfort with its quiet operation, ensuring that movie nights or presentations remain undisturbed by distracting fan noises. Additionally, its sophisticated lens shifting capabilities allow for flexible installation options, enabling users to position the projector in various settings without compromising image quality.

In conclusion, the Epson 9100 is a versatile and high-performance projector that merges advanced technologies with exceptional features. From 3LCD technology and 4K enhancement to extensive connectivity options and quiet operation, it caters to the needs of both casual viewers and serious professionals looking for superior home entertainment or presentation solutions. Its combination of vivid imagery and user-friendly design makes it a standout choice in the projector market.
Top Page Image Contents