Kodak A-61557 manual

Page 29

12.Launch the Kodak ScanTest Software.

13.Clean each drive roller by selecting Eject on the Kodak ScanTest Software window. Selecting Eject will turn the drive rollers for about 5 seconds.

14.Thoroughly clean all of the drive rollers (black and white) with the swab. While the rollers are turning, use an up-and-down motion to clean the entire roller. You may need to use several cleaning swabs if the rollers are very dirty.

15. Replace the top scanner cover.

NOTE: Be sure that the covers are installed in the proper positions. Take care not to install covers at an angle. The paper path should be clear to allow documents to transport freely through the scanner.

A-61557 December 2006

27

Image 29

Contents I6000 Series Check Scanners Contents Safety information User precautions European Union Safety and regulatory agency approvalsUnited States Acoustic emission EMC statementsEuropean Union Peoples Republic of ChinaIntroduction Scanner featuresWhat’s in the box Getting StartedRecommended MinimumDecember Windows Installing the driversDecember Page December Update Device Driver Wizard window is displayed Click Next December Windows XP December Page Select No, not this time and click Next Page December Back view Scanner componentsFront view I6090 Scanners only Inside viewDocument Size Using the ScannerTurning the scanner on and off Documents Scanning yourFor i6060/i6090 Check Scanners For i6015 Check ScannerDaily cleaning MaintenanceProcedures Description CAT NoTo clean the remaining drive rollers Procedure Weekly cleaningDecember Page Cartridge Replacing the inkScanner State TroubleshootingIndicator lights Clearing a document jam Helpful hints Problem solvingError Codes Possible Solution Problem Possible Solution Image quality issuesAppendix a Specifications Scanner Dimensions TemperatureMicr recognition Micr data transmissionDecember