Kodak KY0730485 quick start Spectrocam Setup

Page 10

Matchprint Professional Server for DocuColor 12 Printer/Copier – Quick Start

Spectrocam Setup

1.Shut down the computer.

2.Connect the Spectrocam to the COM 1 (or appropriate) serial port on the back of the Matchprint Professional Server.

3.Plug the Spectrocam power connector into the AC adapter and then plug the AC adapter into a power outlet.

4.Power on the computer.

5.Launch the Matchprint Professional Server software.

Note: Always disconnect the Spectrocam from the AC power supply before removing the Spectrocam from the Matchprint Professional Server.

Calibration Procedure

1.From the Printer menu, select XeroxDocuColor 12 (or the name of the printer requiring calibration). The Printer Settings window displays.

2.Click on Calibration to display menu selections Perform Printer Calibration and Printer Calibration Setup.

3.Select Printer Calibration Setup to display the following setup screen:

2002 Kodak Polychrome Graphics. All Rights Reserved.

10

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Professional Server Trademarks Table of Contents Product Safety and Compliance Avertissement Service Information Quick Start Steps Printer SetupStarting the Software MPS RIP Printer Calibration Spectrocam Setup 2002 Kodak Polychrome Graphics. All Rights Reserved 2002 Kodak Polychrome Graphics. All Rights Reserved Scanner Left corner of the test form Click on OK to return to the calibration window Spectrocam TIPs Adding a Spooler 2002 Kodak Polychrome Graphics. All Rights Reserved Adding a Hot Folder 2002 Kodak Polychrome Graphics. All Rights Reserved General Tab Setting PreferencesJob Parameters Metric Media Size US Media Size Cache TabPaths Tab Roles Tab To print to a Hot Folder or Spooler Installing PPDsJob Printing To print a job from the Matchprint Professional Server2002 Kodak Polychrome Graphics. All Rights Reserved
Top Page Image Contents