Operation
Screen Image
Timer
(Models AMT & ATS only)
Use the elevating foot to horizontally center the projected image on the screen. To release the foot, press the release button, while lifting the front of the projector to the desired height. Use the elevating wheel to make fine adjustments.
If the image is not level, make an adjustment by turning the leveling foot at the rear of the projector.
To time your slides, use the timer switch for slide changes from 3 to 22 seconds.
To interrupt the timer, press either the forward or reverse button. For manual operation, slide the timer switch to Off.
12 | KODAK EKTAGRAPHIC III Slide Projector |