Kodak III manual Using a Dissolve Control, Shutdown, Reinserting the Lens

Page 24

Operation

Reinserting the Lens

To reinsert the lens, push the focus knob up and position the lens gear teeth on the lens barrel with the notch on the projector.

Using a Dissolve Control

One of the more common uses for a dissolve control is a simple two-projector fade. This feature fades down the light beam in one projector, while changing the image and fading up the light beam in the other projector. This eliminates a dark-screen interval.

When using a dissolve control, you need to divide your slides into two trays (odd- and even-numbered slides).

The dissolve control has two connectors that plug into the remote-control receptacles in the rear of two projectors. Refer to your dissolve-control operating manual for additional instructions and features.

See your dealer in Kodak products for more information on Kodak dissolve controls.

Shutdown

To shut down,

•remove and store the tray

•slide the power switch to off

Your projector will remain warm for several minutes.

20	KODAK EKTAGRAPHIC III Slide Projector

Image 24

Contents Kodak Ektagraphic Important Safety Instructions Kodak Ektagraphic III Slide Projectors Congratulations Contents Overview Front RightIntroduction OperationStartup Models III BR and ABR OnlyOperation Models A, AMT and ATS Loading the Slide Tray Front-Screen Projection Rear-Screen Projection With a Dissolve Control Tray Removing the Tray Raised Index Mark Press the select bar all the way downProjecting Your Slides LensLamp Forward Reverse Focus Random ProjectionScreen Image Timer Models AMT & ATS onlyReading Light Special-Application ReceptacleSingle Slides Selecting Slide Projection Lenses Lens Focal Length/ Projector Distance Choosing a Curved- or Flat-Field LensOperation Editing Your Presentation Removing the Lock Ring Adding a Slide Clearing a Gate Jam Using the Built-In Viewer Model ATS Only Removing the LensOpening the Viewer Using a Dissolve Control ShutdownReinserting the Lens Maintenance Lamp TipsChanging the Projection Lamp Cleaning the Condenser, Heat-Absorbing Glass, and Mirror Condenser Lens Heat-Absorbing Glass Models without Kodak Extra Bright Lamp ModuleReassembling the Lamp Module Mirror Thermal Fuses Troubleshooting Consult this guide before calling for serviceTroubleshooting Warranty Limitations Your Rights Under State LawHow to Obtain Service AssistanceShipping Instructions Special-Application Receptacle Identiﬁcation Chart Appendix aPage Page Eastman Kodkcompany