Kodak III manual Mirror Thermal Fuses

Page 30

Maintenance

Mirror

Thermal Fuses

To clean the mirror, invert the lamp module to reach the mirror. Gently clean the mirror with a soft, lint-free cloth moistened with lens cleaner.

When your maintenance is complete, push the lamp module back into the projector.

Your projector has two thermal fuses that prevent overheating. If your projector will not operate, call the Kodak Information Center or Kodak in your country to obtain the name of a service center nearest you (see “ How to Obtain Service” on page 30 ).

26	KODAK EKTAGRAPHIC III Slide Projector

Image 30

Contents Kodak Ektagraphic Important Safety Instructions Kodak Ektagraphic III Slide Projectors Congratulations Contents Overview Front RightStartup IntroductionOperation Models III BR and ABR OnlyOperation Models A, AMT and ATS Loading the Slide Tray Front-Screen Projection Rear-Screen Projection With a Dissolve Control Tray Removing the Tray Raised Index Mark Press the select bar all the way downProjecting Your Slides LensLamp Forward Reverse Focus Random ProjectionScreen Image Timer Models AMT & ATS onlyReading Light Special-Application ReceptacleSingle Slides Selecting Slide Projection Lenses Lens Focal Length/ Projector Distance Choosing a Curved- or Flat-Field LensOperation Editing Your Presentation Removing the Lock RingAdding a Slide Clearing a Gate Jam Using the Built-In Viewer Model ATS Only Removing the LensOpening the Viewer Using a Dissolve Control ShutdownReinserting the Lens Maintenance Lamp TipsChanging the Projection Lamp Cleaning the Condenser, Heat-Absorbing Glass, and Mirror Condenser Lens Heat-Absorbing Glass Models without Kodak Extra Bright Lamp ModuleReassembling the Lamp Module Mirror Thermal Fuses Troubleshooting Consult this guide before calling for serviceTroubleshooting Warranty Limitations Your Rights Under State LawHow to Obtain Service AssistanceShipping Instructions Special-Application Receptacle Identiﬁcation Chart Appendix aPage Page Eastman Kodkcompany