Operation
Using the Built-In Viewer
(Model ATS Only)
Removing the Lens
Important
Before opening the viewer, you must remove the projection lens from the projector.
Turn the focus knob to the horizontal position. Push the knob toward the top of the projector as you withdraw the lens.
Opening the Viewer
Grasp the viewer handle and pull it out from the base of the projector. It will pop into place.
Slide the power switch to lamp to project your slides.
Closing the Viewer To close the viewer, fold it and push it back into the body of the projector.
| KODAK EKTAGRAPHIC III Slide Projector | 19 |
|
|
|