2
Configuring Your Printer
This chapter presumes that you have set up your printer and that you may or may not have installed the printer software.
Configuring printer settings
Configuring basic NOTE: When you first power on the printer, the printer automatically steps you
printer settings | through the process of selecting the Language. |
| To set or change basic printer settings: |
1.Press Home.
2.Press to select Printer Settings, then press OK.
3.Press to select one of the following settings:
•Date and Time*
–Press OK, then press to select Year, Month, Day, Hour, or Minute. Press or to change the values; press OK when you are done.
•Time to Low Power
–Press to change the time to
•Tagged Images Printing (see Printing tagged pictures, page 14)
–Press to select On or Off.
If you select On, when you are printing pictures, the printer LCD prompts you to verify that you want to print pictures that were tagged (or marked) using your camera. Different cameras use different terminology; KODAK Digital Cameras use “marked” images; others use either tagged images or DPOF.
•Language
–Press OK, press to select a language, then press OK.
•Reset All Settings (see Resetting factory defaults, page 34)
NOTE: Resetting factory defaults does not change the date and time, language, or country/region.
4.Press Back.
* You can also synchronize the printer's date and time to your computer from Home Center Settings under Tools in Home Center Software.
4 | www.kodak.com/go/aiosupport |