7
Maintaining Your Printer
Your printer requires little maintenance. However, Kodak recommends cleaning the scanner glass and lid regularly to remove dust and fingerprints, which affect the quality and accuracy of scanning.
Except for cleaning the printer, keep the printer plugged in with AC power turned on. If you use a power strip, don't turn off the power strip.
Keep the printhead and ink cartridges in the printer at all times. This helps prevent damage to the printhead.
Service agreements are available in some countries. Contact dealers of KODAK
Products for more information.
For recycling and/or disposal information, contact your local authorities. In the US, go to the Electronics Industry Alliance at www.eia.org or go to www.kodak.com/go/recycle.
General care and cleaning
CAUTION:
Always disconnect the power to the printer before cleaning it. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts.
•To clean the printer, wipe the outside with a clean, dry cloth.
•Keep the surrounding area vacuumed and
•Protect the printer from tobacco smoke, dust, sand, other small particles (such as crumbs), and liquid spills.
•Do not place objects on the printer.
•Keep the printer supplies away from direct sunlight and out of
•Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer.
•If the printer has been exposed to bad weather or has water inside it, turn it off and let it dry completely. If this does not solve the problem, contact Kodak Service & Support.
www.kodak.com/go/aiosupport | 23 |