2
Basic Functions
This chapter describes how to print, copy, scan, and fax using the factory default settings on your printer.
NOTE: To reset your printer to the factory default settings:
1.Press Home.
2.Press 
to select Printer Settings, then press OK.
3.Press 
to select Reset All Settings, then press OK.
4.Press OK to reset the settings, then press OK to continue.
Loading originals
You can place originals for copying, scanning, or faxing on the scanner glass or in the automatic document feeder (ADF). Originals placed in the ADF are fed into the printer automatically.
Using the scanner glass
To place an original on the scanner glass:
1.Remove any originals from the automatic document feeder (ADF).
2.Lift the scanner lid, and place the document or picture face down in the
3. Close the scanner lid.
www.kodak.com/go/aiosupport | 8 |