KODAK ESP 5200 Series
Connecting to a WPS wireless router
If your router supports
To connect to a network using WPS:
1.Press Home.
2.Press to select Network Settings, then press OK.
3.With WiFi Setup Wizard selected, press OK.
NOTE: The
4.With WPS Connect selected, press OK.
5.Select one of two methods of connecting:
IMPORTANT: Before you press OK on the printer, make sure you know where the router's push button is, or where to enter the generated PIN. If necessary, consult your Internet service provider or router device manufacturer’s documentation for more information.
Pressing a button | Entering a PIN |
|
|
|
|
|
|
|
NOTE: You will have two minutes to | a. Press | to select Generate |
press or select the WPS | WPS PIN, then press OK. | |
button. It may be a button on | b. In your wireless router’s | |
the device or a virtual button | software, locate the PIN screen. | |
in the device’s software. | c. Enter the PIN you received on | |
| ||
a. With Push Button Configuration | the LCD into the PIN screen. | |
selected, press OK. |
|
|
b. Press or select the WPS button for |
|
|
your wireless router. |
|
|
|
|
|
6.When the confirmation message appears, press OK.
If the printer is successfully connected, the
If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking for more information.
7.If you haven’t yet installed the KODAK
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP5200+1133).
8.Enable the firewall that you disabled earlier.
www.kodak.com/go/aiosupport | 7 |