KODAK ESP 5200 Series
Using default settings to print a picture
To print a picture from a memory card using the factory default settings:
1.Load photo paper with the logo side facing up (see Loading photo paper, page 15), and move the left
2.Insert the memory card into the memory card slot.
memory card slot
left
3.Press or to select the picture you want to print.
4.Press Start to begin printing.
The printer prints one 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT: To prevent loss of data from your memory card, do not remove it from the printer while printing.
Changing the settings and printing pictures
You can change the print photos options for an individual picture or group of pictures, or you can change the settings and save them as the default.
To print a picture or pictures using settings other than the default settings:
1.Load photo paper with the logo side facing up (see Loading photo paper, page 15), and move the left
memory card slot
left
2.Insert the memory card into the memory card slot.
3.Press or to select the picture you want to print, then press OK.
www.kodak.com/go/aiosupport | 19 |