Printing without a computer
NOTE: If you don’t press any buttons after 5 seconds, printing starts automatically.
Reducing red eye in your prints
Your printer dock incorporates technology that automatically detects and corrects red eye in your subjects before you print your pictures.
■Your printer dock defaults to red-eye reduction being always on, and the Red-eye reduction button/light, 
, glows green.
■Red-eye reduction is applied to images that were captured using the flash on your digital camera.
■The Red-eye reduction button is disabled when printing from a computer. If printing from a computer (see page 24), make sure Kodak EasyShare software is installed on the computer.
■Printing may slightly increase when using red-eye reduction.
■Your printer dock may apply red-eye reduction to an area such as a sunburn, which darkens the area in your print. Turn off red-eye reduction.
To turn red-eye reduction off, press the Red-eye reduction button, 
.
To change the red-eye reduction default to off, press and hold the Red-eye
reduction button, 
, for 5 seconds.
The Red-eye-reduction light blinks, then turns off.
18 | www.kodak.com/go/support |
