Kyocera FS-1128MFP Function Menu a b, Collate, Duplex, Exit, 2 1-sided2-sided 3 2-sided1-sied

Page 97

Basic Operation

Two-sided to Two-sided

5	5
3	3
4	4
1	1
2	2
Original	Copy

Produces two-sided copies from two-sided originals. The optional document processor is required.

NOTE: The paper sizes supported in Two-sided to
Two-sided are Legal, Letter, Oficio II, Executive, A4,	3
B5, A5 and Folio.

The procedure for using two-sided/duplex copying is explained below.

Function Menu: a b

*********************

2	Collate	T
3	Duplex	T
	[ Exit	]

Duplex:

a b

********************

2 1-sided>>2-sided

3 2-sided>>1-sied

1Press the Function Menu key. Function Menu appears.

2Press the U or V key to select [Duplex].

3Press the OK key. Duplex appears.

Finish. Binding: a b

********************

2 p Top

Orig.Orientation: a b

********************

2 d Top Edge left

4Press the U or V key to select the desired duplex copying mode.

NOTE: [2-sided>>1-sided] and [2-sided>>2-sided] are shown only when the optional document processor (DP-110) is installed.

If you select [1-sided>>2-sided], press [Detail] (the Right Select key) and you can select the binding edge of the finished copies and the original setting orientation.

After pressing the OK key, select the binding edge of the finished copies and the original setting orientation.

OPERATION GUIDE

3-15

Image 97

Contents OPERATION GUIDE FS-1028MFP/FS-1128MFPIntroduction Thank you for your purchase of FS-1028MFP/FS-1128MFP Included GuidesOperation Guide This Guide Symbols Safety Conventions in This GuideOPERATION GUIDE Contents Contents1 Part Names 2 Preparation before UsePause and Resumption of Jobs Canceling of Jobs Device/Communication 7 Status / Job Cancel8 Default Setting System Menu Job Finish Notice File Name Entry Print OverrideTroubleshooting MaintenanceManagement AppendixFor U.S.A. and Caution / Warning LabelsCanada other countriesOther precautions Installation PrecautionsEnvironment Handling of plastic bags Power supply/Grounding the machineAvoid locations with direct exposure to hot or cold air Cautions when using the machine Precautions for Useviii Do not attempt to perform any operations not explained in this guide Cautions when handling consumables Store the machine while avoiding exposure to direct sunlight Laser Safety Europe Radio Frequency Transmitter Safety Instructions Regarding the Disconnection of Power EuropeRadio Tag Technology xiii1. Safety of laser beam SAFETY OF LASER BEAM USA2. The CDRH Act 3. Optical unit 4. MaintenanceOther precautions for users in California, the United States Safety Instructions Regarding the Disconnection of Power USARadio Tag Technology MERCURY WARNINGMULTIFUNCTIONAL PRODUCT LIMITED WARRANTY Warranty USA FS-1028MFP/FS-1128MFPxvii xviii Legal Restriction on Copying/ScanningLegal and Safety Information Legal Information Regarding Trade Names Copyright c 1998-2006 The OpenSSL Project. All rights reserved Open SSLeay Licensexxii xxiii Original SSLeay Licensexxiv Monotype Imaging License AgreementEnergy Saving Control Function Low Power ModeAutomatic 2-Sided Copy Function Paper RecyclingChapter 7 - Status / Job Cancel About this Operation GuideChapter 8 - Default Setting System Menu Chapter 9 - MaintenanceConvention Conventions in This GuideDescription Examplexxviii This chapter identifies the machine parts and operation panel keys 1 Part NamesOperation Panel MachinePart Names Operation PanelUsed to select a menu item, move the cursor when 3 Original Size Indicator Plate 4 Operation Panel 5 Top Cover Machine6 Front Cover 7 Drum Unit 8 Main Charger Cleaner 9 Lock Lever 1 Original Cover For FS-1028MFP only 2 Platen14 Paper Width Guides 15 Cassette 16 Paper Width Guides MP Tray 11 Top Tray 12 Paper Length Guide 13 Paper Stopper17 MP Multi-Purpose Tray 18 MP Tray Extension 21 Network Interface Connector 22 Rear Cover 23 Main Power Switch 19 Anchor Pin 20 USB Interface Connector24 Power Cord Connector 2 Preparation before Use Documents Contained in the Included CD-ROM Check bundled itemsPreparation before Use DocumentsConnection Example Determining the Connection Method and Preparing CablesSend E-mail PrintingAvailable Standard Interfaces Preparing Necessary CablesFunction InterfaceConnecting Cables 4 Turn the main power switch on . The machine begins to warm up Login User Name L b Switching the Language for Display LanguageLogin Password Menu Login Common Settings a bOPERATION GUIDE Login Password Menu Login Sys. Menu/Count. a b 5 User Property Setting Date and TimeLogin Password Menu Login Date Setting a b Time Zone a bDate Setting a b 2 Date Format 3 Time Zone 2 Date Format 3 Time Zone ExitDate Setting TCP/IP IPv4 Setup by Entering IP Addresses Network Setup LAN Cable ConnectionSys. Menu/Count. a b 1 Report 2 Counter 2-12Network Setting a b Administrator only2 NetWare 3 AppleTalk Exit TCP/IP Settings a b 2 IPv4 Setting 3 IPv6 Setting Exit3 IPv6 Setting Exit IPv4 Setting a b TCP/IP Settings a b 1 TCP/IPIPv4 Setting a b 1 DHCP 2 Bonjour 3 IP Address Exit123.145.167.189 IPv4 Setting a b 3 IP Address IPv4 Setting a b 1 DHCP 2 Bonjour5 Default Gateway Exit the IPv4 Setting menuExit Default Gateway a b 123.145.167.189 123.145.167.189 IPv4 Setting a b 3 IP Address 4 Subnet MaskSubnet Mask 2-16Setting page 2-18 to Off When setting an Default Gateway, set the DHCP2-17 Login Password Login User Name L bMenu Login DHCP Settings2-19 2-20 Bonjour Settings2 IPv4 Setting 3 IPv6 Setting Exit TCP/IPa b 2 I/F Block Set 3 Security Level Exit Network Setting a b2 *On TCP/IP Settings a b 1 TCP/IP 3 IPv6 Setting Exit2-22 AppleTalk Setup2 NetWare 3 AppleTalk Exit Exit Administrator onlyAppleTalk 2-232-24 Installing SoftwareFor details, refer to the KYOCERA COMMAND CENTER Operation Guide COMMAND CENTER Settings for E-mail2-25 2-26 Sending E-mail2-27 DescriptionBefore Loading Paper Loading Paper2-28 2-29 Loading Paper in the Cassettes2-30 NOTE Paper sizes are marked on the cassette2-31 5 Load the paper in the cassette. Ensure the side to be printed is facing down and the paper is not folded, curled, or damaged2-32 Loading Paper in the Multi Purpose TrayPull out the subtray Pull the MP tray towards you until it stops2-33 Acceptable Envelope Loading EnvelopesSize 2-342-35 2-36 When you load envelopes or cardstock in the multi purpose tray2-37 IMPORTANT How to load envelopes orientation andSpecifying Paper Size and Media Type for the Cassettes Specifying Paper Size and MediaSelection Item Selectable Size/Type2 Default Screen 3 Sound Exit Orig./Paper Set. a b 7 Copy Exit Common Settings a b2 Def. Orig. Size 3 Custom PaperSize Exit Cassette 1 Set. a b2 Legala 3 Statementa Cassette 1 Size a bCassette 1 Set. a b 1 Cassette 1 Size Exit Cassette 1 Type a bPlain, Recycled, Bond, Color, High Quality and Rough Specifying Paper Size and Media Type for the Multi Purpose Tray2-41 2 MP Tray Type Exit 2 Def. Orig. Size 3 Custom PaperSize Exit MP Tray Set. a b2-42 Others MP Tray Size a b2 Envelope #10 3 Envelope #9 Size EntryY D b 5.83 x ***11.49Placing Originals on the Platen Loading Originals2-44 Part Names of the Document Processor Loading Originals in the Document ProcessorOriginals Supported by the Document Processor Originals Not Supported by the Document Processor2-46 How to Load Originals3 Basic Operation Power On Power On/OffWhen the main power indicator is lit When the main power indicator is offIn case of not using the machine for a extended period of time Power OffAuto Low Power Mode Sleep Sleep and Auto SleepAuto Sleep Login Login/LogoutLogout Address Entry B b One-Touch Keys and Program KeysABC Text Address Entry A b 5y@kyoceramita.co.jp ABC Text One-Touch KeyReady to copy Message DisplayCopies 100%Copying Density Adjustment Option Adjusting DensityFunction Menu CollateManual Selecting Image Quality2 v Lighter 3 w Lighter Function Menu a bAuto Zoom Zoom CopyingZoom Entry Standard ZoomStandard Zoom a b 2 Auto 3 Standard Zoom2 200% 3 141% A5 A4 Zoom EntryOne-sided to Two-sided Duplex CopyingTwo-sided to One-sided 3-14Finish. Binding a b 2 1-sided2-sided 3 2-sided1-sied2 p Top Orig.Orientation a b 2 d Top Edge leftOrig. Binding a b 2 d Top Edge left Scanning Job No Pages Cancel2 d Top Edge left Orig. Binding a b 2 d Top Edge left Orig.Orientation a bSet original and press Start key. Job No Pages 3 Cancel End Scan Collate Copying3-17 3-18 Printing - Printing from Applications3-19 7 Click Source and select the paper source3-20 SendingSend to Send as E-mail2 G FolderSMB 3 H FolderFTP Address Entry B b ABC Textp aaaaaaaaa@kyoceramN p bbbbbbbbb@kyoceramN Exit Dest. Confirm. a b3-22 1 p E-mail Send to Folder SMB/Send to Folder FTP3 H FolderFTP Host NameSMB A b Osaka SD ABC TextPath Login User Name C b Maury*S ABC Text Login Password A bA b SD3\reportb Exit Dest. Confirm. a b p Morgan@kyoceramitaNFor send to folder SMB Data to be entered3-26 G EI5 G PT10 Exitb 0667640000 b Cancel Next p Morgan@kyoceramNa b 1 Detail 2 Delete Confirm Destination ScreenSet original and press Start key Cancel Destination List a bChoosing from the Address Book Specifying DestinationSelect Addr Book a b t Ext Address Book ExitSearch in External Address Book Search in Address BookSending to Different Types of Destinations Multi Sending Choosing by One-Touch KeySearchName A b ma ABC Menu Text Ext Address Book a bCanceling Jobs Canceling JobsJob Cancel List a b 2 Cancel Job Job will be canceled. Are you sure? z 0008 r CopyChecking Remaining Toner Checking Remaining Toner and PaperChecking Remaining Paper StatusChanging and Deleting Settings Registering SettingsRecalling Settings Program Copying and Sending3-34 4 Copying Functions How to Select Original SizeOriginal Size a b 2 Legalq 3 Statementq2 Envelope #10 3 Envelope #9 Selecting the Cassette Paper Selection2 A Lettera Plain 3 B Customa Plain Category Selecting the Multi Purpose TrayHow to SelectPage OPERATION GUIDE When placing originals on the optional document processor When placing originals on the platenOriginal Orientation Top Edge TopOrig.Orientation a b 1 c Top Edge Top EcoPrint EcoPrint4-10 2-in-1 Mode Combine Mode4-11 4-12 4-in-1 ModeFunction Menu Types of Page Boundary LinesCombine 2 2 in 3 4 in Detail 2 in 1 Layout a b2 l Solid Line 3 m Dotted Line Border Line4-14 Continuous Scan a b Continuous Scan4-15 Example of Job Finish Notice Job Finish Notice4-16 Destination a b JobFinish Notice a b2 Address Entry Address Book a b p Maury p Morgan Menu Address Entry B b @abcdefg.jp ABC TextFile Name Entry A b File2009 File Name Entry4-18 Print Override a b Print Override4-19 4-20 5 Sending Functions Original Image Original SizeSending Functions Detail2 Envelope #10 3 Envelope #9 Relationship between Original Size, Sending Size, and Zoom Sending SizeOriginal Size and the size you the same2 Letter 3 Legal Sending Size a b2 Auto Zoom2 2-sided Duplex SendingDetail OriginalWhen placing the original on the optional document processor When placing the original on the platenthe basic screen for sending Adjustable range of image File FormatFile Format 2 TIFF 3 XPS Detail5-11 5-12 Original Image2 Manual Adjusting Density5-13 Scan Resolution a b 3 200x400dpi S.Fin Scan Resolution5 400x400dpi U.Fin 5-14Color Selection a b Color / Grayscale / Black and White Selection2 Grayscale 3 Black & White 5-155-16 5-17 Subject Entry B b Subject and Body EntryBody Entry 5-18Procedure using computer WSD ScanProcedure using this machine 2 G FolderSMB 3 H FolderFTPWSD Scan P Computer02 P Computer03 Cancel Detail1 From Computer Select Computer a b5-21 p Maury p Morgan Menu Address Entry A b @abcdefg.jp ABC Text5-22 10 Specify the destination, and press the Start key to start sendingOriginal Size FTP Encrypted TXOriginal Image FTP Encrypted TX a b5-24 Sanning Image using ApplicationPrinting Documents Stored in USB Memory 6 Document BoxSaving Documents to USB Memory Scan to USB Removing USB MemoryLimitations Printing Documents Stored in USB MemoryPrinting Document Box a bN Store File USB MemoryMenu Select USB Memory a b Ready to print. CopiesStoring Documents Saving Documents to USB Memory Scan to USBReady to scan A4q OPERATION GUIDE Menu Select Removing USB MemoryMenuFolder 1 Memory Detail 2 Remove Memory USB memory can be safely removed7 Status / Job Cancel Available Status Screens Checking Job StatusStatus / Job Cancel 2 Send Job Status 3 Store Job Status Pause Print Job Status a b0009 Detail When complete job name not displayed in detailed informationProcessing Item / KeyPage When complete destination name not displayed in detailed information Store Job Status screen Details Display / KeyAvailable Job History Screens Checking Job HistoryDisplaying Print Job Log Job histories to be displayed0006 Detail ErrorResult 001000004 Detail Displaying Send Job Log7-10 menu appears Displaying Store Job Log7-12 10200Displaying Job Log History Menu Sending the Job Log HistoryNOTE7 Confirming Current Destination Setting the destinationDestination a b 1 Confirmation Registering DestinationRegister 2 Address EntryRegister a b Automatic Job Log History Transmission2 *Address Entry 2 Send History 3 Destination Exit Auto Sending a bManual Job Log History Transmission Setting E-mail SubjectJobs 16*jobsSubject Job Log History a b 2 Send History 3 Destinationprinter 7-18Pause and Resumption of Jobs Canceling of JobsCheck of Device Status Device/Communication7 Store Job Log 9 Printer Pause Scannerb ReadyC b Handling the Devices7-22 8 Default Setting System Menu How to display the Sys. Menu/Count. menu Common SettingsSwitching the Language for Display Language Default Setting System MenuOptional language Sys. Menu/Count. a b 4 User/Job Account 5 User PropertyMessage display 5 Press the U or V key to select a language Korean Simplified Chinese Traditional ChineseCommon Settings a b 1 Language Default Screen3 Sound Exit Default Screen a b 1 Status 3 SendCommon Settings a b 1 Language 2 Default Screen SoundExit Sounda b 2 FAX Speaker 3 FAX Monitor ExitExit Common Settings a b Display Bright2 Default Screen 3 Sound Exit Display Bright. a b 3 Darker Key Confirmation a bCustom Original Size Setup Original/Paper SettingsDimensions Orig./Paper Set. a bJ **11.23 Size EntryX D b 1.972 Def. Orig. Size 3 Custom PaperSize Exit Def. Orig. Size a b Default Original Size Setup8-10 8-11 Adding a Custom Size and Media Type for Paper to Print2 Cassette 2 Size 3 Cassette 3 Size 2 Def. Orig. Size 3 Custom PaperSize Exit Custom PaperSize a bSize EntryX D b 4.13 J ***6.00Default Screen Common SettingsPaper Size and Media Type Setup for Cassettes Sys. Menu/Count. a bCassette 1 Type a b 2 Cassette 1 Type Exit Cassette 1 Size a b8-14 8-15 Paper Size and Media Type Setup for Multi Purpose Tray2 Envelopr #10 3 Envelope #9 MP Tray Size a b 16Ka = Others8-16 Paper types and weights Paper Weight8-17 8-18 1 Paper Weight 2 Print Density Exit Paper Weight a b2 Def. Orig. Size 3 Custom PaperSize Exit Media type Set. K b 2 Transparency 3 Rough Exit14 Press the OK key. The Print Density menu appears Osaka SD Kyocer*S Name Entry8-21 2 Def. Orig. Size 3 Custom PaperSize Exit Def. PaperSurce a b Default Paper Source2 Cassette 3 Cassette 8-221 All Media Type 2 Def. Orig. Size 3 Custom PaperSize Exit Media for Auto a b3 Transparency Media for Auto Selection8-24 Special Paper Action2 Speed Priority 2 Def. Orig. Size 3 Custom PaperSize Exit SpecialPaper Act.a bSpecialPaper Act.a b 1 Adj. PrintDirect 8-252 Default Screen 3 Sound Exit Preset Limit D b 1 Preset Limit8-26 Measurement a b Switching Unit of Measurement2 mm 8-27Duplexing Error Error HandlingPaper Mismatch Error 8-282 PaperMismatchErr Exit DuplexPaperError a b Error Handling a b2 Display Error Error Handling a b 1 DuplexPaperErrorExit Function Default a b Function Defaults2 Scan Resolution 3 FAX Resolution Exit Orig.OrientationContinuous Scan 2 Default Screen 3 Sound Exit Function Default a b8-31 8-32 Original Image2 Scan Resolution 3 FAX Resolution Exit Original Image a b Function Default a bScan Resolution 8-332 200x200dpi Fine 3 200x400dpi S.Fin 2 Scan Resolution 3 FAX Resolution Exit Scan Resolution a bColor Selection 8-348-35 2 Scan Resolution 3 FAX Resolution Exit Color Selection a b8-36 Density 2 TIFF 3 XPS8-37 8-38 Zoom8-39 File Name EntryABC Text Additional Info. a b 2 Scan Resolution 3 FAX Resolution Exit File name Entry A b doc2 Date 3 Job No Subject/BodyQRSTUVWXYZ* S Subject Entry K b abcdefghijklmnopqrstu vwxyzABCDEFGHIJKLMNOPabcdefghijklmnopqrstu vwxyzABCDEFGHIJKLMNOP QRSTUVWXYZ ABC Text 8-41NOTE Refer to page 3-17 for Collate/Offset Collate8-42 NOTE Refer to page 4-10 for EcoPrint EcoPrint8-43 8-44 2 in 1 Layout2 4 in 1 Layout 3 Border Line Exit Detail Setting a b2 in 1 Layout 4 in 1 Layout2 4 in 1 Layout 3 Border Line Exit 4 in 1 Layout a b 2 Scan Resolution 3 FAX Resolution Exit Detail Setting a b2 i Down then Right 3 j Left then Down 8-468-47 Border Line8-48 Orig. Binding2 p Top 2 4 in 1 Layout 3 Border Line Exit Orig. Binding a b8-49 8-50 Finish BindingImage Quality Finish.. Binding a b8-51 Color TIFF Comp 2 4 in 1 Layout 3 Border Line Exit Image Quality a b8-52 2 TTN2 Color TIFF Comp. a bXPS FitTo Page 8-538-54 2 4 in 1 Layout 3 Border Line Exit XPS FitTo Page a bLogin Operationa b Login Operation2 Select Character 8-55Photo Processing Copy SettingsSys. Menu/Count.a b Printer2 Paper Selection 3 AutoPaperSelect Exit Paper Selection a b Paper Selection2 Def. PaperSource 8-57Auto % Priority Auto Paper Selection2 Paper Selection 3 AutoPaperSelect Exit AutoPaperSelect.a b2 Paper Selection 3 AutoPaperSelect Exit Auto % Priority a b Copya b8-59 8-60 Select Key Set2 Right Exit Select Key Set. a bLeft 4 Duplex8-62 Sending SettingsExit Senda b Sys. Menu/Count.a b 7 Copy 8 Printer2 DestinationCheck Exit Select Key Set. a b 2 Color Selection2 DestinationCheck Exit DestinationChecka b DestinationCheck2 Check New Dest Exit Dest. Confirm. a b 8-648-65 Print Document Box SettingsStore 8-662 Select Key Set 3 Polling Box Exit Edit Destination = Adjust/Maint Exit2 Store Exit Printa b 2 Right Exit Lefta b8-68 This function is already registeredEmulation Set Printer SettingsSelection of emulation 8-692 EcoPrint 3 Override A4/LTR Exit Sys. Menu/Count.aEmulation Set. a b 5 PCL6 6 KPDL 8-70When KPDL Is Selected for Emulation KPDL Error Rpt a bWhen KPDLAuto Is Selected for Emulation Emulation Set. a b 5 PCL6Alt. Emulation a b 3 DIABLO 4 EPSON LQ-850 EcoPrintSys. Menu/Count.a b 7 Copy 9 Send Exit Printer a b8-73 Override A4/LTROverride A4/LTR a b 1 Off DuplexFinish 8-742 Bind Long Edge 3 Bind Short Edge Copies2 EcoPrint 3 Override A4/LTR Exit CopiesD b 1 999*copies2 EcoPrint 3 Override A4/LTR Exit Orientation a b Orientation2 Landscape 8-76LF Action FormFeed TimeoutFormFeed TimeOut* b 5 7 CopyLF Action CR Action2 LF and CR 3 Ignore LF Ignore LFCR Action Paper Feed Mode2 LF and CR 3 Ignore CR 8-792 Fixed Paper Feed Mode a b8-80 Printing Reports Printing Reports/Sending NoticeMenu Map Status Page Status PageReporta b 2 Admin Rpt Set 3 Result Rpt Set Exit Report Print a b2 Status Page 3 Font List Exit 2 Press the OK key. The Report menu appearsPrint Are you sure? z Status Page Service Status PageSys. Menu/Count.a b Document Box Edit Destination Network Status Page2 Send/Box Density 3 Correct. Bk Line Exit Service Setting a b Adjust/Maint. a b2 Network Status 3 New Developer Exit Print Are you sure? z Network Status2 Admin Rpt Set 3 Result Rpt Set Exit Send Result ReportResult Rpt Set. a b 2 FAX RX Result 3 JobFinish Notice Exit2 FAX Exit E-mail/Folder a b 1 Off 2 On Send Result a b8-86 Copy Denst. Adj Adjustment/MaintenanceSys. Menu/Count. a Document Box5 +1 Send/Box Density2 Send/Box Density 3 Correct. Bk Line Exit Send/Box Densitya b8-89 Correct. Bk Line2 Send/Box Density 3 Correct. Bk Line Exit Correct. Bk Linea b New Developer2 OnLow 3 OnHigh 8-908-91 New Developer. Are you sure?Date/Time Date/TimerSys. Menu/Count.a b 4 User/Job Account 5 User Property 8-922009 8-94 NOTE If you try to change the date/time when a trial application page 8-151 is running, the If you change Date/Time setting, trial functions will be unavailable2 Default Screen 3 Sound Exit Login User Name L b Date FormatDate Format a b 8-958-96 Time Zone a b Time Zone8-97 8-98 3 Time Zone 4 Summer Time Exit Summer TimeSummer Time a b 8-998-100 Auto Error Clear ON/OFF Auto Error Clear8-101 2 Sleep Timer 3 PanelReset Timer Exit Login Password Menu Login Timer Setting a bError Clear Timer Auto Err. Clear a b2 Sleep Timer 3 PanelReset Timer Exit Err. Clear Timer D b 5 Auto Sleep30*sec Auto Sleep ON/OFF8-104 Auto SleepSleep Timer Sleep Timer D b 115*min 8-105Auto Panel Reset ON/OFF Auto Panel Reset8-106 Panel Reset Timer Auto Panel Reseta b 1 Off8-107 Timer Setting a b Low Power TimerPanelReset TimerD b 5 90*secLow Power Timer D b 1 Unusable Time2*min 8-109Start Time 2 Sleep Timer 3 PanelReset Timer Exit Unusable Time a b 7 OffCurrent Time 8-110Unlock Code End Time0000 8-111Adding an Individual Destination Editing Destination Address Book/Adding One-Touch Keys= Adjust/Maint Exit Sys. Menu/Count.a b Document BoxEntering Contact Name Entering E-mail Address p E-mail Address 4/7 tmaury@kyoceramita.NSpecifying Destination on page Entering Folder SMB/FTP AddressNtid7004 G FolderSMB8-115 8-116 Login User Name A b Maury*S ABC Text Login Password A bAddress Number Dest. Confirm. a b p Morgan@kyoceramitaN b 0667640000********* b ExitAddress Number D b 001 Address Number= Adjust/Maint Exit Edit Destinationa b Adding a Group2 Print List Exit Addressbook a b 1 Detail/Edit 2 DeleteEntering Group Name Entering Group Member l Sally3 Add Member 1 DetailDelete Are you sure? z p Sally Deleting member from groupEditing a Destination Page Select Key No. a b Adding a Destination on One-touch Key2 No Exit Addressbook a b Registering new destinationKey Edit 2 No ExitDelete Editing One-touch Key7 Press the OK key. A confirmation screen appears Overwrite. Are you sure? z No Yes No8-126 Sys. Menu/Count.a b 1 Report 2 Counter Restarting the System3 Security Level 5 Op Functions Exit Restart Are you sure? Yes NoLAN Interface Setup Network SetupLogin 2 NetWare 3 AppleTalkTCP/IP IPv6 Setup TCP/IP IPv4 SetupLAN Interface a b 2 10Base-Half 3 10Base-FullIPv6 Setting a b NetWare SetupSystema b 8-1302 On 8-132 WSD Scan SetupWSD Print Setup 8-134 2 NetWare 3 AppleTalk Exit WSD-PRINT a bDefault Setting Protocol DetailSSL Setting on page Restarting the8-136 Port Number D b FTPClient a bTCP/IP Settings a b 2 IPv4 Setting 3 IPv6 Setting Exit Protocol Detail a bNetwork Security SSL Setting8-138 IPP Security 3 HTTP Security Exit IPP Security a b 1 IPP/IPP over SSL 8 Host Name 9 LAN Interface Exit Secure Protocol a b 1 SSLHTTP Security 8-140Page LDAP Security 8 Host Name 9 LAN Interface Exit8-142 Secure Protocol a b 2 IPP Security 3 HTTP Security SNMPv3 SettingLDAP Security a b 2 LDAPv3/TLS 3 LDAP over SSLIPSec Setting 8-145 Rule Setting a bUSB Host USB memory slot setting Interface Block Setting1 Network Setting 3 Security Level Exit I/F Block Set. a bPress the U or V key to select I/F Block Set USB Device USB interface settingPress the U or V key to select USB Device 8-148 USB DeviceI/F Block Set. a b 1 USB Host 2 USB Device Optional interface Optional interface card setting8-149 8-150 Security Level Security Level settingOp Functions Optional Functions8-151 8-152 This chapter describes cleaning and toner replacement 9 MaintenanceCleaning Toner ContainerCleaning the Machine CleaningGlass Platen MaintenanceIMPORTANT Do not place the drum unit on end CLEANER HOME POSITION Toner Container Toner Container ReplacementTurn the lock lever to the lock position Close the front cover 4 Remove the label from the toner containerProlonged Non-use Prolonged Non-Use and Moving of the MachineMoving the Machine OPERATION GUIDE This chapter explains how to solve problems with the machine 10 TroubleshootingResponding to Error Messages Solving MalfunctionsTroubleshooting Solving MalfunctionsSymptom CheckpointsClean the platen or the document SymptomIs the charger wire dirty? Clean the charger wire10-4 Alphanumeric Responding to Error MessagesError Message 10-510-6 The job is canceled. Press the OK Error MessageSTOP key to cancel printing An error has occurred during10-8 installed toner containers regional job is canceled. Press the OK keyspecification does not match the scanned pages. Press the CancelReference Page Responding to an Error Lamp FlashesFAX Operation Guide 10-10Precautions with Paper Jams Jam Location IndicatorsClearing Paper Jams Online Help MessagesDuplexer Paper Cassette/Paper Feeder10-13 2 Open the duplexer’s cover in front of the machine and remove any jammed paperInside the Machine Rear Cover Optional Document Processor 6 Close the document processor 7 Place the originals Open the document processor Remove the jammed original10-17 10-18 11-1 11 ManagementJob Accounting Checking the CounterFirst User Login Administration User Login AdministrationEnabling/Disabling User Login Administration Management2 Job Account. Set 3 Unknown ID Job Exit User Login Set. a b 5 User Property 6 Common Settings ExitUser/Job Account a b 2 Local User List Exit1 *Off User Login3 Netwk Authentic Host NameAuto Logout Login/Logout11-5 Accounting on page Adding a User11-6 Page OOOOOOOOOOO Account Name Changing User Propertiesk KyoceramitaOsaka Change 11-9Changing user information Local User List a b l DeviceAdmin Unknown login user name Job1 Detail/Edit 3 Add User2 Job Account. Set Login Password Menu Login User/Job Accounta b 1 User Login SetExit Unknown ID Job a b 2 PermitJob Accounting First Job Accounting SetupEnabling/Disabling Job Accounting 11-132 Account. Report 3 Total Accounting Exit Job Accounting a b 3 Unknown ID Job Exit Job Account.Set.a b2 On 11-14Account ID When the screen to enter the login user name and password appears11-15 3 Unknown ID Job Exit Managing AccountsUse of the Machine on page 11-16Page 11-18 6 Default Setting ExitChanging account information Account. List a b k UI R&D DEP Managing the Copier/Printer Counts3 Add Account Delete Are you sure? z k UI R&D DEPT2 Account Report 3 Total Accounting Exit Default Setting a b User/Job Accounta b 1 User Login SetJob Account.Set a b 1 Apply LimitRestriction Items Restricting the Use of the Machine11-22 Page Limit Pages D b 1 - 9999999 **123456*pages Overwrite. Are you sure? 2 User Property 3 Common Settings Exitz k Osaka GUI DESIGN Applying Limit of RestrictionJob Account.Set.a b 4 Each Job Account 5 Account. List Exit Default Setting a b2 Copy/Print Count 3 Counter Limit Exit Apply Limit a b 1 Immediately 3 Alert Only Exit11-26 Available Settings Default Counter Limit11-27 Job Account.Set.a b 1 Each Job Account 2 Account. List User Property11-28 2 Copy/Print Count 3 Counter Limit Exit Counter Limit a b Default Setting a b2 Print Restrict 3 ScanRest.Other Copy RestrictionD bTotal Job Accounting/Resetting the Counter Counting the Number of Pages Printed11-30 2 Scanned Pages 3 FAX TX Pages Exit Copy/Print PagesC b Copy1/3 2 Account. Report 3 Total Accounting Exit Total Accountinga b1234567 11-31Each Job Accounting/Resetting the Counter Exit Reset counter. Are you sure? z Total JobAccountingTotal Accountinga b 1 Printed Pages 2 Scanned Pages 11-322 Scanned Pages 3 Counter Reset Exit 5 Account List 6 Default Setting Exit Each Job Accounta bJob Account.Set.a b k Kyoceramita k UI R&D DEPT Osaka GUI DESIGNa bCopy/Print PagesC b Copy1/3 1234567 Limit1234567 Osaka GUI DESIGNa b Exit Reset counter. Are you sure? z k Osaka GUI DESIGN Yes No1 Printed Pages 2 Scanned Pages 11-34When Split is selected for Managing the Copier/Printer Count Printing an Accounting Report11-35 2 Account. Report 3 Total Accounting Exit Print Are you sure? 3 Unknown ID Job Exit Job Account.Set a bz Total JobAccounting 11-36Sys. Menu/Count.a b 1 Report Checking the Counter3 System Exit 2 Scanned Pages Exit4 Press the Y or Z key to check the count Printed Pages C b Copy1/4 123456711-38 Appendix Overview of Optional Equipment Optional EquipmentDocument Processor DP-110 Paper Feeder PF-100Installing the Memory Module Precautions for Handling the Memory ModuleAppendix-3 Verifying the expanded memory Removing the Memory ModuleAppendix-4 Keys Used Character Entry MethodAppendix-5 File name input Selecting Type of CharactersSymbols OsakaSD3 123 TextEntering Alphabets and Numerals Entering CharactersEntry mode Available charactersEntering Symbols Login User Name a b KyocerEntry When Select Character Is Selected in Login Operation Settings abcdefghijklmnopqrst uvwxyzABCDEFGHIJKLMNO NextCassette PaperOptional paper feeder Multi Purpose tray MP trayAppendix-10 Basic Paper Specifications Basic Paper SpecificationsSpecifications Supported PaperCondition Choosing the Appropriate PaperIngredient Supported Paper SizesMoisture Content Basis WeightOther Paper Specifications SmoothnessAppendix-14 Special PaperTransparency OHP film Choosing Special PaperCardstock Appendix-15Thick Paper EnvelopesLabel Appendix-16Preprinted Paper Colored PaperRecycled Paper Appendix-17Machine SpecificationsFS-1028MFP FS-1128MFPAppendix-19 Appendix-20 PrinterAppendix-21 Scanner2 Available Operating System Windows Vista Document Processor option Environmental SpecificationsAppendix-22 Auto Form Feed Timeout GlossaryDefault Gateway DHCP Dynamic Host Configuration ProtocolEcoPrint Mode NetBEUI NetBIOS Extended User InterfaceEmulation FTPFile Transfer ProtocolPostScript POP3 Post Office ProtocolPPM prints per minute Printer DriverTWAIN Technology Without Any Interested Name TCP/IP IPv6USB Universal Serial Bus2.0 WIA Windows Imaging AcquisitionNumerics IndexAppleTalk Appendix-23 Auto Sleep 3-5, Appendix-23dpi Appendix-23 Duplex 3-14 DHCP Appendix-23Emulation Appendix-24 FTP Appendix-24KPDL Appendix-24 Login 3-6 Logout 3-6Label Appendix-16 NetBEUI Appendix-24 NetWare 8-130, Appendix-24Special Paper 8-24, Appendix-14 Resolution Appendix-19, Appendix-20POP3 Appendix-25 PPM Appendix-25Status Page 8-81, Appendix-25 SMTP Appendix-25TCP/IP Appendix-25 TWAIN Appendix-26Index-6 Page Page First Edition

Related manuals

Manual 6 pages 38.19 Kb

Manual 20 pages 33.15 Kb

FS-1128MFP, FS-1028MFP specifications

The Kyocera FS-1028MFP, FS-1028MFP DP, and FS-1128MFP are multifunctional printer solutions designed to meet the demands of small to medium-sized offices. Each model combines printing, copying, scanning, and faxing capabilities into a single, compact device, ensuring efficient workflow and versatile usage.

One of the standout features of these models is their exceptional print quality, which is achieved through Kyocera's precision technology. With a printing resolution of up to 1200 x 1200 dpi, users can expect sharp text and vibrant graphics, making these units ideal for producing professional documents. The FS-1028MFP offers a print speed of 28 pages per minute (ppm), while the FS-1128MFP can reach 32 ppm, catering to different office productivity needs.

These devices incorporate Kyocera’s durable long-life drum technology. This feature significantly reduces the total cost of ownership as the drum lasts for a remarkable 300,000 pages, minimizing the frequency of replacements. Furthermore, with low-energy consumption due to the efficient design, users can reduce their environmental impact while enjoying reliable performance.

The multifunction capabilities extend beyond basic printing. The FS-1028MFP and FS-1128MFP feature a robust scanning function with color and black-and-white scanning capabilities, enabling users to digitize documents efficiently. The document feeder allows for quick scanning of multi-page documents, a crucial feature for busy offices where time is of the essence.

In addition to basic faxing and copying functions, the FS-1028MFP DP model includes a duplex printing feature, which allows for automatic double-sided printing. This not only saves time but also helps reduce paper consumption, promoting a more eco-friendly approach to office operations.

Connectivity options for these models include USB and network interfaces, making it simple to integrate them into any office environment. The devices are compatible with various operating systems, enhancing their versatility. Advanced security features are also part of the package, ensuring sensitive information remains protected during print and scan operations.

With a user-friendly control panel and intuitive layout, the Kyocera FS-1028MFP, FS-1028MFP DP, and FS-1128MFP provide a seamless user experience that supports the growing demands of modern office environments, delivering quality, efficiency, and cost-effectiveness in one multifunction device.