Kyocera KM-P4845w manual Paper Type Compatible paper, Unacceptable paper, Storage of paper

Page 24

CHAPTER 3 GETTING READY FOR PRINTING

2. Paper

(1) Paper Type

Note the following restrictions on paper that can be used in this machine.

●Compatible paper

1.Paper source 1 (option), paper source 2, and paper source 3

• Paper roll width: 17" to 36" [210 to 920 mm]

• Paper roll outer diameter: 6 3/4" [180 mm] or less

• Paper roll inner diameter: 3" [76 mm (75.2 to 77.2 mm)]

• Acceptable paper roll types Plain paper (64 to 80 g/m2) Vellum

Film

2.Bypass

•Paper sizes (standard paper): 8 1/2" x 11" to 36" x 48" [A4 portrait to A0]

•Paper width: 8 1/2" to 36" [210 to 920 mm]

•Paper length: 11" to 48" [297 to 1189 mm]

•Acceptable paper materials Plain paper (64 to 80 g/m2) Vellum

Film

●Unacceptable paper

•Paper other than the paper described in “● Compatible paper”

•Paper with staples, etc.

•If paper is wrinkled, folded or broken, unroll the paper until the problem disappears and cut the paper before using it.

●Automatic paper width detection

If the paper roll that has been set is of a standard size, the paper width will be automatically detected. The following sizes can be detected.

Inch specifications

Metric specifications

<Architecture>

<A sizes>

36"

A0: 841mm

24"

A1: 594mm

18"

A2: 420mm

12"

A3: 297mm

9"

A4: 210mm

<Engineering>

<B sizes>

34"

B1: 728mm

22"

B2: 515mm

17"

B3: 364mm

11"

B4: 257mm

8 1/2"

 

NOTE

•Automatic detection will not function for the bypass.

•Paper width of non-standard sizes can be registered. See “1. Paper width” in the default setting. (Page 5-6)

•For switching between standard sizes (architecture/engineering [A sizes/ B sizes]), see “10. Standard size” in the default settings. (Page 5-9)

●Storage of paper

If the machine is not used for an extended period time, remove the paper roll and return it to its original packaging and reseal it.

IMPORTANT

•Vellum

Since vellum is very susceptible to its environment, when it is not used, put it in a plastic bag and seal it.

•When using vellum at a high humidity or at a low temperature, vellum will become fragile, resulting in wrinkles prints or missing images. If images are not properly printed, perform the following procedure.

*When using cut vellum:

Change the orientation of the paper (portrait or landscape).

*When using a vellum roll:

Unroll 1 length of paper and cut the paper before using it.

•When using roll paper whose surface is contaminated with adhesive, remove the adhesive or unroll the paper until the adhesive is no longer visible and cut off the unusable length.

3-6

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operation Guide Page Symbols Trademark Information Windows MacintoshConfiguring the Printer Configuring Your ComputerHost Names System diagram with options installed Scanner unit Roll unitKey counter PrinterChapter IMPORTANT! Please Read First Please Read First Installation Precautions Precautions for USE Precautions for USE Names of Parts Main BodyPrior to SET-UP ‡ fl Operation Panel Included Software Required ItemsEnergy Saver Function Auto Shutoff FunctionSetup System Configuration Printing from WindowsPrinting from Macintosh Procedures Connecting the Printer to Your Network Network Settings Configuring the IP Address, etcTurn the main switch on the printer back on OFF Name Settings Changing the Computer Device and Host Names Getting Ready for Printing Paper Paper Type Compatible paperUnacceptable paper Automatic paper width detectionHow to Set a Paper Roll Machine Close the front coverHow to Use the Paper Tray Support Plate Dew prevention heaterGetting Ready for Printing Printer Operation Basic printingPrinting with manually fed media Making a Test Print Making a test print from the Web Manager interfaceCanceling Printing Processing data Now printingResetting the printer Printer Operation Machine Default List of Machine SettingsSetting Description DefaultTimer set AdjustmentFusing temp Auto shutoffStandard size Auto roll overBuzzer Mgr. codeConfiguring Machine Setting Configuration by user Configuration by manager Configuring of each item Paper width Media Type Pre-set TempPaper type Paper material Timer set Roll endAuto shutoff Size adjustment Fusing temp Custom paperStandard size Auto roll over BuzzerMgr. code change Printer Settings Language Switching Language EnglishIf One of These Messages is Displayed Message RemedyTroubleshooting Replenishing the Toner Grasp it horizontally and shake it side to side 10 timesDegrees to replenish the toner Replacing the Waste Toner Tank Countermeasures against Call for service Message When Paper Jams Removal ProcedureJam Location Display Printer body will be opened Close the ejection cover If Paper misfeed. Remove paper. appearsIf Paper misfeed. Open front cover appears Grasp the handles a of the roll unit to unlock the unit Troubleshooting Trouble Check Point ProcedureTroubleshooting Troubleshooting Troubleshooting Specifications HardwareSpecifications Software Operating Environment Printer driversPrint Utility recommended operating environment Page Above warning is valid only in the United States of America Page Page Kyocera Mita AMERICA, INC
Related manuals
Manual 66 pages 63.96 Kb

KM-P4845w, KM-P4850w specifications

The Kyocera KM-P4850w and KM-P4845w are advanced multifunction printers designed for businesses seeking reliable, high-performance solutions for their printing needs. These models stand out due to their versatility and robust functionalities, ensuring they can handle various tasks while maintaining exceptional quality.

One of the key features of both the KM-P4850w and KM-P4845w is their impressive print speed, which can reach up to 50 pages per minute. This speed makes these printers ideal for high-volume environments where efficiency is paramount. The first page out time is also noteworthy, allowing users to receive their printed documents quickly without unnecessary delays.

The KM-P4850w and KM-P4845w utilize advanced laser technology that ensures sharp text and vibrant color output. The resolution can go up to 1200 x 1200 dpi, producing professional-quality prints suitable for reports, presentations, and marketing materials. Users can expect consistent results, even with complex graphics, thanks to the printers’ high-definition imaging capabilities.

These models also support a range of media types and sizes. They can handle everything from standard letter-sized paper to larger formats, catering to diverse printing needs. Additionally, their flexible paper handling options include multiple paper trays and a manual feed slot, enhancing productivity.

Connectivity is another strong aspect of the KM-P4850w and KM-P4845w. Both printers offer versatile network options, including USB, Ethernet, and optional wireless capabilities. This flexibility provides businesses with the ability to integrate these printers seamlessly into their existing workflows, whether in a single-user or multi-user environment.

Central to these models is Kyocera's commitment to sustainability and cost efficiency. They are designed with a long-life drum that significantly reduces waste and the need for frequent replacement. Furthermore, the EcoPrint feature allows users to save on toner and paper without sacrificing quality, making them an environmentally friendly choice.

In conclusion, the Kyocera KM-P4850w and KM-P4845w are powerful multifunction printers that bring together speed, quality, versatility, and sustainability. With their advanced imaging technology, robust features, and efficient performance, they are well-suited for businesses of all sizes seeking reliable printing solutions. These printers empower users to handle demanding workloads while maintaining a focus on cost-effectiveness and environmental responsibility.
Top Page Image Contents