Kyocera KM-P4850w, KM-P4845w manual Fusing temp, Custom paper, Standard size

CHAPTER 5 MANAGEMENT AND SETTING

8.Fusing temp.

1 Press the N or M key to select a media type.

Inch specifications

		Fusing temp.:
		1.Plain
	Metric specifications
		Fusing temp.:
		1.Plain
2
	Press the Enter key.
	The selected item will flash. Press the N or M key to select
3	the fixing temperature for each media type.
	>If “Plain” has been selected, select from 145 °C, 155 °C,
		and 165 °C.
	Inch specifications
		Plain:
		155° C*
	Metric specifications
		Plain:
		155° C*
	>If “Vellum” has been selected, select from 165 °C, 175 °C,
		and 185 °C.
	>If “Film” has been selected, select from 150 °C, 160 °C,
		and 170 °C.
	>If “Custom” has been selected, the temperature that has
		been set for the custom media type will be displayed.
	Press the Enter key. The display will show “set (value) *” and
4	return to the step 1 screen.
5
	Press the N or M key to select “End” [“back”].
	Press the Enter key. The printer will return to the machine
6	settings screen.

9.Custom paper.

1The selected item will flash. Press the N or M key to select a media type.

Inch specifications

	Custom paper:
	Vellum*
	Metric specifications
	Custom paper:
	Vellum*
	Press the Enter key. The display will show “set (value) *” and
2	return to machine settings screen.

10.Standard size

1Press the N or M key to select the type of standard size. For an inch specification printer, select “Architecture” or

“Engineer”. For a metric specification printer, select “A sizes” or “B sizes”.

Inch specifications

	Standard size:
	Architecture*
	Metric specifications
	Standard size:
	A sizes*
	Press the Enter key. The display will show “set (value) *” and
2	return to machine settings screen.

5-9