Kyocera KM-P4850w, KM-P4845w manual Machine Default, List of Machine Settings, Setting Description

Page 35

CHAPTER 5 MANAGEMENT AND

SETTING

The */Menu key on the operation panel can be used to configure settings such as the paper width and media type for each of the paper trays, the printer’s IP address, etc.

Based on their content, settings are divided into “Machine settings” that configure the printer’s operation and “Printer settings” that configure the printer’s IP address and related network information. In addition they are divided according access privilege: there is a subset that offers limited control to any “User”, while full access to all settings is reserved for the “Manager”. Input of the pin code is required for the manager to configure settings.

For a description of each setting, see “(1) List of Machine Settings” and “(2) List of Printer Settings” (Page 5-11).

1. Machine Default

(1)List of Machine Settings

Settings common to user/manager

 

Setting

Description

Selectable values

Default

Page

 

 

 

 

 

 

1.

Paper width

If this item is set to “Input size”, a non-standard paper width

For each paper

Auto size

5-6

 

 

can be set. Use the N or M key to enter the paper width for

source:

 

 

 

 

each paper source.

Auto size/

 

 

 

 

 

Input size (17"~36"

 

 

 

 

 

[210mm~920mm])

 

 

 

 

 

 

 

 

2.

Media Type

If this item is set to “ON”, a media type can be registered for

ON/OFF

OFF

5-6

 

[Pre-set

each paper source. Fixing temperature, print size, and fix/

 

 

 

 

Temp.]

unfix of roll end will be set based on the registered paper

 

 

 

 

 

material.

 

 

 

 

 

 

 

 

 

3.

Paper type

If “2. Media Type [Pre-set Temp.]” is set to “ON”, a media

For each paper

Plain

5-6

 

[Paper

type can be set for each paper source including the bypass

source:

 

 

 

material]

table.

Plain/Vellum/

 

 

 

 

If “Custom” is selected, fixing temperature, print size, etc. will

Film/Custom

 

 

 

 

be set based on “9. Custom paper”.

 

 

 

 

 

 

 

 

 

4.

Roll end

This item sets whether or not paper roll end is fixed to the

For each paper

Unfix [Unfixed]

5-7

 

 

core of the roll. If “Fixed” is selected, paper will be

material:

(Film: Fixed)

 

 

 

automatically cut when paper runs out.

Unfix [Unfixed]/

 

 

 

 

 

Fixed

 

 

 

 

 

 

 

 

5-1

Image 35
Contents Operation Guide Page Symbols Trademark Information Macintosh WindowsHost Names Configuring the PrinterConfiguring Your Computer Printer System diagram with options installed Scanner unitRoll unit Key counterChapter IMPORTANT! Please Read First Please Read First Installation Precautions Precautions for USE Precautions for USE Main Body Names of PartsPrior to SET-UP ‡ fl Operation Panel Required Items Included SoftwareAuto Shutoff Function Energy Saver FunctionPrinting from Macintosh SetupSystem Configuration Printing from Windows Turn the main switch on the printer back on Procedures Connecting the Printer to Your NetworkNetwork Settings Configuring the IP Address, etc OFF Name Settings Changing the Computer Device and Host Names Getting Ready for Printing Automatic paper width detection PaperPaper Type Compatible paper Unacceptable paperHow to Set a Paper Roll Close the front cover MachineDew prevention heater How to Use the Paper Tray Support PlateGetting Ready for Printing Basic printing Printer OperationPrinting with manually fed media Making a test print from the Web Manager interface Making a Test PrintProcessing data Now printing Canceling PrintingResetting the printer Printer Operation Default Machine DefaultList of Machine Settings Setting DescriptionAuto shutoff Timer setAdjustment Fusing tempMgr. code Standard sizeAuto roll over BuzzerConfiguring Machine Setting Configuration by user Configuration by manager Paper type Paper material Configuring of each item Paper widthMedia Type Pre-set Temp Auto shutoff Timer setRoll end Size adjustment Standard size Fusing tempCustom paper Mgr. code change Auto roll overBuzzer Printer Settings Language English Language SwitchingMessage Remedy If One of These Messages is DisplayedTroubleshooting Grasp it horizontally and shake it side to side 10 times Replenishing the TonerDegrees to replenish the toner Replacing the Waste Toner Tank Countermeasures against Call for service Message Jam Location Display When Paper JamsRemoval Procedure Printer body will be opened If Paper misfeed. Open front cover appears Close the ejection coverIf Paper misfeed. Remove paper. appears Grasp the handles a of the roll unit to unlock the unit Trouble Check Point Procedure TroubleshootingTroubleshooting Troubleshooting Troubleshooting Hardware SpecificationsSoftware Operating Environment Printer drivers SpecificationsPrint Utility recommended operating environment Page Above warning is valid only in the United States of America Page Page Kyocera Mita AMERICA, INC
Related manuals
Manual 66 pages 63.96 Kb

KM-P4845w, KM-P4850w specifications

The Kyocera KM-P4850w and KM-P4845w are advanced multifunction printers designed for businesses seeking reliable, high-performance solutions for their printing needs. These models stand out due to their versatility and robust functionalities, ensuring they can handle various tasks while maintaining exceptional quality.

One of the key features of both the KM-P4850w and KM-P4845w is their impressive print speed, which can reach up to 50 pages per minute. This speed makes these printers ideal for high-volume environments where efficiency is paramount. The first page out time is also noteworthy, allowing users to receive their printed documents quickly without unnecessary delays.

The KM-P4850w and KM-P4845w utilize advanced laser technology that ensures sharp text and vibrant color output. The resolution can go up to 1200 x 1200 dpi, producing professional-quality prints suitable for reports, presentations, and marketing materials. Users can expect consistent results, even with complex graphics, thanks to the printers’ high-definition imaging capabilities.

These models also support a range of media types and sizes. They can handle everything from standard letter-sized paper to larger formats, catering to diverse printing needs. Additionally, their flexible paper handling options include multiple paper trays and a manual feed slot, enhancing productivity.

Connectivity is another strong aspect of the KM-P4850w and KM-P4845w. Both printers offer versatile network options, including USB, Ethernet, and optional wireless capabilities. This flexibility provides businesses with the ability to integrate these printers seamlessly into their existing workflows, whether in a single-user or multi-user environment.

Central to these models is Kyocera's commitment to sustainability and cost efficiency. They are designed with a long-life drum that significantly reduces waste and the need for frequent replacement. Furthermore, the EcoPrint feature allows users to save on toner and paper without sacrificing quality, making them an environmentally friendly choice.

In conclusion, the Kyocera KM-P4850w and KM-P4845w are powerful multifunction printers that bring together speed, quality, versatility, and sustainability. With their advanced imaging technology, robust features, and efficient performance, they are well-suited for businesses of all sizes seeking reliable printing solutions. These printers empower users to handle demanding workloads while maintaining a focus on cost-effectiveness and environmental responsibility.