Kyocera FS-8000CD, FS-8000CN manual Replacing the Oil Unit, Hot

Page 31

Replace Oil

Replacing the Oil Unit

The oil unit lasts an average of 25,000 pages and must be replaced when the printer displays the

kit message.

1

Hot!

Open the front cover. Pull out the paper feed unit. The fuser unit is very hot. Never proceed to the next step without cooling down the fuser.

Fuser

The fuser unit is very hot. Never proceed to the next step until the fuser cools down.

Note

29

Image 31

Contents FS-8000C FS-8000CD FS-8000CN Page FS-8000C Quick Reference Guide Contents Following documentation and CD-ROM are sup- plied Guide to the information about the printerUnderstanding the Error Messages Check waste Clean printerPath error Format errorAorA2 ID errorInstall MK Insert the sameLoad MP tray ErrorPress Load Cassette #Paper feeder # Option stackerCover open Option tray ##Side cover Replace toner Clean printer Replace toner TK-82 #######Print overrun† Set paperExternal device Toner lowTK-82 ####### UnsupportedLoading Paper B5 A5 Square the edges Clearing Paper Jams Paper Jam Cassette # Paper Jam Feeder # CoverPaper Jam Duplexer Drawer Paper Jam MP TrayPaper Jam Paper Feed Unit Page Pulling the two Open the fuserTop cover by SimultaneouslyStopper Lever Primary Transfer Paper Jam Side Cover Paper Jam Option Stacker Replace Toner Clean printer Toner Container ReplacementToner low TK-82C Replacing the Toner Container Printer power offWhile pressing Replacing the Waste Toner Bottle Page Hot Replacing the Oil UnitLevers outward Rear releaseOld oil unit Page Replacing the Maintenance Kit D Separation Charger Unit Charger unit Unit. When youRemove the old SeparationGreen Knob Others Cleaning the Paper Feed Unit Cleaning the PrinterBe careful not to touch the black sponge roller Secondary transfer roller during cleaningAs this may adversely affect print quality Cleaning the Main Charger Unit Grid Cleaner Slightly lift Page Kyocera Corporation