Kyocera FS-8000CN Remove the old, Separation, Charger unit, From the sec, Ondary transfer, Shown

Page 35

	2	Remove the old
	2	separation
		separation
		charger unit
		from the sec-
		ondary transfer
		unit. When you
	Separation	pull the project-
	Separation	ing pin on the
	Charger	ing pin on the
	Unit	front end of the
	Projecting	separation
	Pin	charger unit
		towards you as
		shown, the
		back end of the
		separation
		charger unit lifts
	Secondary	up. Hold the
	Transfer Unit	up. Hold the
		back end of the
		separation
		charger unit to
		remove it.

33

Image 35

Contents FS-8000C FS-8000CD FS-8000CN Page FS-8000C Quick Reference Guide Contents Following documentation and CD-ROM are sup- plied Guide to the information about the printerUnderstanding the Error Messages Check waste Clean printerPath error Format errorAorA2 ID errorInstall MK Insert the sameLoad MP tray ErrorPress Load Cassette #Paper feeder # Option stackerCover open Option tray ##Side cover Replace toner Clean printer Replace toner TK-82 #######Print overrun† Set paperExternal device Toner lowTK-82 ####### UnsupportedLoading Paper B5 A5 Square the edges Clearing Paper Jams Paper Jam Cassette # Paper Jam Feeder # CoverPaper Jam Duplexer Drawer Paper Jam MP TrayPaper Jam Paper Feed Unit Page Pulling the two Open the fuserTop cover by SimultaneouslyStopper Lever Primary Transfer Paper Jam Side Cover Paper Jam Option Stacker Toner low TK-82C Toner Container ReplacementReplace Toner Clean printer Replacing the Toner Container Printer power offWhile pressing Replacing the Waste Toner Bottle Page Hot Replacing the Oil UnitOld oil unit Rear releaseLevers outward Page Replacing the Maintenance Kit D Separation Charger Unit Charger unit Unit. When youRemove the old SeparationGreen Knob Others Cleaning the Paper Feed Unit Cleaning the PrinterAs this may adversely affect print quality Secondary transfer roller during cleaningBe careful not to touch the black sponge roller Cleaning the Main Charger Unit Grid Cleaner Slightly lift Page Kyocera Corporation