Kyocera FS-8000CD, FS-8000CN manual Replacing the Maintenance Kit D Separation Charger Unit

Page 34

Replacing the Maintenance Kit D (Separation Charger Unit)

The following procedure is not necessary for European countries and Australia.

Note

The separation charger unit needs to be replaced after every 100,000 pages of printing when the printer dis- plays the message Install MK [D] (ATTENTION indicator flashes).

1	Open the
	front cover.
	Pull the
	paper feed
	unit all the
	way out.
Paper Feed Unit
32

Image 34

Contents FS-8000C FS-8000CD FS-8000CN Page FS-8000C Quick Reference Guide Contents Guide to the information about the printer Following documentation and CD-ROM are sup- pliedUnderstanding the Error Messages Format error Clean printerPath error Check wasteInsert the same ID errorInstall MK AorA2Load Cassette # ErrorPress Load MP trayOption tray ## Option stackerCover open Paper feeder #Set paper Replace toner Clean printer Replace toner TK-82 #######Print overrun† Side coverUnsupported Toner lowTK-82 ####### External deviceLoading Paper B5 A5 Square the edges Clearing Paper Jams Paper Jam Feeder # Cover Paper Jam Cassette #Paper Jam MP Tray Paper Jam Duplexer DrawerPaper Jam Paper Feed Unit Page Simultaneously Open the fuserTop cover by Pulling the twoStopper Lever Primary Transfer Paper Jam Side Cover Paper Jam Option Stacker Replace Toner Clean printer Toner Container ReplacementToner low TK-82C Printer power off Replacing the Toner ContainerWhile pressing Replacing the Waste Toner Bottle Page Replacing the Oil Unit HotLevers outward Rear releaseOld oil unit Page Replacing the Maintenance Kit D Separation Charger Unit Separation Unit. When youRemove the old Charger unitGreen Knob Others Cleaning the Printer Cleaning the Paper Feed UnitBe careful not to touch the black sponge roller Secondary transfer roller during cleaningAs this may adversely affect print quality Cleaning the Main Charger Unit Grid Cleaner Slightly lift Page Kyocera Corporation