Kyocera FS-8000CD, FS-8000CN manual Be careful not to touch the black sponge roller

Page 39

 

Clean the metal

 

roller as shown

 

(the registration

 

roller) using the

 

cleaning cloth

 

(included in the

 

toner kit).

 

Registration Roller

 

(Metal)

 

1

Belts

Clean the belts

using the cleaning

 

 

cloth.

Secondary Transfer

Roller (See Note below.)

 

2

 

Be careful not to touch the black sponge roller

Note

(the secondary transfer roller) during cleaning

as this may adversely affect print quality.

 

37

Image 39
Contents FS-8000C FS-8000CD FS-8000CN Page FS-8000C Quick Reference Guide Contents Following documentation and CD-ROM are sup- plied Guide to the information about the printerUnderstanding the Error Messages Check waste Clean printerPath error Format errorAorA2 ID errorInstall MK Insert the sameLoad MP tray ErrorPress Load Cassette #Paper feeder # Option stackerCover open Option tray ##Side cover Replace toner Clean printer Replace toner TK-82 #######Print overrun† Set paperExternal device Toner lowTK-82 ####### UnsupportedLoading Paper B5 A5 Square the edges Clearing Paper Jams Paper Jam Cassette # Paper Jam Feeder # CoverPaper Jam Duplexer Drawer Paper Jam MP TrayPaper Jam Paper Feed Unit Page Pulling the two Open the fuserTop cover by SimultaneouslyStopper Lever Primary Transfer Paper Jam Side Cover Paper Jam Option Stacker Toner Container Replacement Replace Toner Clean printerToner low TK-82C Replacing the Toner Container Printer power offWhile pressing Replacing the Waste Toner Bottle Page Hot Replacing the Oil UnitRear release Levers outwardOld oil unit Page Replacing the Maintenance Kit D Separation Charger Unit Charger unit Unit. When youRemove the old SeparationGreen Knob Others Cleaning the Paper Feed Unit Cleaning the PrinterSecondary transfer roller during cleaning Be careful not to touch the black sponge rollerAs this may adversely affect print quality Cleaning the Main Charger Unit Grid Cleaner Slightly lift Page Kyocera Corporation