Kyocera FS-C5300DN, FS-C5200DN manual Installation Precautions, Environment, Other Precautions

Page 15

Installation Precautions

Environment

CAUTION Avoid placing the printer on or in locations which are unstable or not level. Such locations may cause the printer to fall. This type of situation presents a danger of personal injury or damage to the printer.

Avoid locations with humidity or dust and dirt. If dust or dirt becomes attached to the power plug, clean the plug to avoid the danger of fire or electrical shock.

Avoid locations near radiators, heaters, or other heat sources, or locations near flammable items, to avoid the danger of fire.

To keep the printer cool and facilitate changing of parts and maintenance, allow access space as shown below. Leave adequate space, especially around the side cover, to allow air to be properly ventilated from the printer.

Top: 400 mm (16 inches)

Left: 400 mm	Right: 250 mm	Rear: 200 mm	Front: 600 mm
(16 inches)	(10 inches)	(7-7/8 inches)	(23-5/8 inches)

Other Precautions

Adverse environmental conditions may affect the safe operation and performance of the printer. Install in an air-conditioned room (recommended room temperature: around 23 °C, humidity: around 60 % RH) and avoid the following locations when selecting a site for the printer.

-Avoid locations near a window or with exposure to direct sunlight.

-Avoid locations with vibrations.

-Avoid locations with drastic temperature fluctuations.

-Avoid locations with direct exposure to hot or cold air.

-Avoid poorly ventilated locations.

If the flooring is of a soft material, it may be damaged by the casters when this product is moved after installation.

xiv

Image 15

Contents FS-C5100DN/C5200DN/C5300DN Contents Computer Interface Specifications Glossary IndexRegarding Tradenames Legal and Safety InformationLicense Agreements Typeface Trademark AcknowledgementMonotype Imaging License Agreement Copyright 1998-2006 The OpenSSL Project. All rights reserved Open SSLeay LicenseThis Software is Provided by the OpenSSL Project AS is Original SSLeay LicensePage Interface connectors Compliance and ConformityAbove warning is valid only in the United States of America Radio Frequency Transmitter Safety InformationLaser Safety Laser NoticePage 2004/108/EC, 2006/95/EEC, 93/68/EEC and 1999/5/EC Safety Instructions Regarding the Disconnection of PowerCdrh Regulations Ozone concentrationCanadian Department of Communications Compliance Statement EN ISODisclaimer Energy Saving Control Function Installation Precautions Other PrecautionsEnvironment Other Precautions Power Supply/Grounding the PrinterHandling of Plastic Bags Precautions for Use Other Precautions About the Operation Guide ConventionsConvention Description Example Xix Personal injuryPage Machine Parts Machine PartsComponents at the Left of the Printer Components at the Front of the PrinterPaper Transfer Unit Paper Ramp Duplex Unit Envelope Switch Internal ComponentsComponents at the Rear of the Printer Operation Panel Handling Paper Handling PaperPaper Availability Paper SpecificationsSpecification General GuidelinesLetter, Legal Hammermill Laser Print 90 g/m² 24 lb Size Product WeightMinimum and Maximum Paper Sizes Recommended PaperPaper Sizes Selecting the Right PaperCondition CompositionSmoothness Basis WeightPaper Weight Equivalence Table Bond Weight lb Europe Metric Weight g/m²Moisture Content Paper GrainOther Paper Properties Paper Type to be Used Paper Type to be Selected Special PaperTransparency Labels Slide the envelope switch to envelope mode and print PostcardsEnvelopes Coated Paper Thick PaperColored Paper Preprinted Paper Recycled PaperPaper Type Indicators Optional paper feeder PF-510 Optional Paper Paper Weight Duplex Path Feeder PF-510 Feeder PF-500Paper Type Paper Source Paper TypeLoading Paper into the Cassette Loading PaperPaper Guides Release Lever Exhausted, the pointer will go down to the level of empty Loading Paper into the MP Multi-Purpose TrayPaper in the opposite direction to counteract the curl When printing on transparencies, feed the sheets intoPrinter one at a time If the paper is considerably curled in one direction, forPaper stopper Printing Operation Printing OperationNetwork TCP/IP, TCP/IP IPv6 settingsThis is mandatory to make the settings effective Changing Network Interface ParametersTCP/IP Press U or V to select On or Off as the setting for DhcpTCP/IP IPv6 TCP/IP IPv6 On RAStateless Off DHCPv6 Off ?Off SecuritySSL Server Off IPSec Off PasswordNetWare AppleTalk On IPP OffNetWare AppleTalk AppleTalk On ?On IPP On?Off IPSec On ?On SSL ServerIPSec Security Level Security Level HighAdjust/ Maintenance Print Network Status Page ? Adjust/MaintenancePrinting a Network Interface Status Installing the Printer Driver Installing the Software in WindowsClick Install software Express Mode Custom Mode Installation on a MacintoshSelect Custom Mode Open System Preferences and click Print & Fax Printer driver installation program starts upPage Page Printing from Application Software Screen Overview Accessing the Status MonitorStatus Monitor Exiting the Status MonitorStatus Monitor icon Sound file Status Monitor SettingsEnable Event Notification Sound Notification TabTransparency Appearance TabEnlarge window Always on topUninstalling Software Windows PC Click UninstallSelect the software package to remove Maintenance MaintenanceToner Color Life of the Toner Container Printable pages Toner Container ReplacementFrequency of Toner Container Replacement General InformationToner Kits FS-C5300DNOpen the top cover top tray Replacing the Toner ContainerPlastic Bag Toner Feed Slot Replacing the Waste Toner Box Open the cap of the new waste toner box Cleaning the Paper Transfer Unit Cleaning the PrinterPush the front cover back in completely Maintenance Maintenance Troubleshooting TroubleshootingTips Symptom Check Items Corrective ActionPrinted Results Corrective Action Print Quality ProblemsFaint or blurred printing Black or white vertical streaksCheck the paper chute and the ramp Grey backgroundMessage Corrective Action Error MessagesPrevious screen is displayed again 1 or 2 seconds Displayed when the envelope switch is set to envelope modeServicing. Contact your service technician Being usedCancel Containers Install the specified toner containerSelected cassette is being prepared PrintingStorage Error Codes Hard Disk ErrorsCode Meaning RAM Disk Errors Code Meaning Memory Card and USB Memory Errors Code MeaningClearing Paper Jams Possible Paper Jam LocationsPaper Jam Message Description Reference Utilizing Online Help Messages General Considerations for Clearing JamsPaper jam at Cassette Paper Jam at MP TrayPaper Jam in Printer Paper Jam at Cassette 2 to Troubleshooting Using the Operation Panel Using the Operation PanelGeneral Information Message Display Understanding the Operation PanelError Codes Status InformationMessage Meaning Ready Indicators in Message DisplayReady, Data, and Attention Indicators Indicator DescriptionMenu Key Cancel KeyKeys GO KeyOK Key Using the Menu Selection System Entering the Mode Selection MenuMenu Selection System Paper Settings Type AdjustPaper Weight Normal Report Print Setting a Mode Selection MenuReport Print Print Menu Map ?Print Menu Map Menu Map Sample Menu MapUnderstanding the Status Using the Operation PanelPrint Status Print Status Page ?Network Status Printer Settings InformationInstalled Options Firmware VersionPrint Fonts List Print Hard Disk File ListPrint RAM Disk File List Print Mem. Card File List Print Mem. Card File List ?00Folder 2 00File ? 00File Copies 001 USB Memory USB memory selectionUSB Memory 00FolderRemove Device Removing the USB memory Copies 010 Paper Source ? Cassette Remove Device ?Copies Number of copies Paper Source Selecting the paper feed sourceJob Box Job RetentionQuick Copy Proof-and-Hold Private Print Stored Job Job Box Quick Copy Using Quick CopyPrinting Additional Copies using Quick Copy Press Z while Job Box is displayedDeleting a Quick Copy Job Using Proof-and-Hold Printing Remaining Copies of a Proof-and-Hold JobDeleting a Proof-and-Hold Job Private/Stored ?Harold Arlen ?Agenda Copies Private/Stored Printing a private print/stored jobReleasing a Private/Stored Job Deleting a Private/Stored Job Job Box Configuration Quick CopyJob Box Configuration Agenda Copies Agenda DeleteColor Displaying the color printed pages Counter Viewing the counter valueCounter Printed Pages Color 1000 Monochrome Printed Pages Displaying the total printed pagesPaper Settings Paper Settings MP Tray Size ? A4MP Tray Size Setting MP tray paper size MP Tray Type Setting the MP tray paper type MP Tray TypePress OK Press MENU. The display returns to Ready Cassette Size ? Custom Cassette 1 to 4 Size Setting the cassette paper sizeSelecting the Size Dial Setting Setting the Paper Size from the Operation PanelUnit Selecting the unit of measurement Unit ? mmEntering the Width and Length Dimension 216 mmCassette Type Cassette 1 to 4 Type Setting the cassette paper typeType Adjust Creating custom paper type Reset Type Adjust Resetting the custom paper type Paper Weight Setting the paper weightDuplex Path Setting the duplex path Print Settings Print SettingsPaper Feed Mode ? Auto Paper Feed Mode Setting the paper feed sourceWhen the Paper Runs Out During Printing Binding Modes Duplex Duplex printingOverride A4/LT Overriding difference between A4 and Letter Duplex ? Off Override A4/LT ? OffEmulation Emulation Setting the emulationError Report ? On Error Report Printing Kpdl errorsGloss Mode Selecting the gloss mode Color Mode ? Color Print Quality Gloss Mode ? LowColor Mode Selecting color or monochrome printing Print Quality Setting print qualitySet EcoPrint Mode ? OffEcoPrint Mode Selecting the EcoPrint mode Set Setting paginationOrientation ? Portrait Wide A4 ? Off Wide A4 Wide A4 pitchOrientation Print orientation TCP/IP IPv4 settings Network Network settingsDhcp Dhcp setting IP Address IP address setting? Off Dhcp ? Off Subnet Mask Subnet mask setting Gateway Gateway settingSubnet Mask Gateway Bonjour ? Off TCP/IP IPv6 IPv6 settingsBonjour Bonjour setting This selects the settings for TCP/IP IPv6RAStateless RA Stateless setting DHCPv6 DHCPv6 settingRAStateless ? Off DHCPv6 ? Off Device Common Selecting/Setting the common device Device Common MSG Language ? EnglishMSG Language Selecting the message language Buzzer Key Confirm. ? On Job End ? Off Buzzer Alarm Buzzer settingKey Confirm. Key confirmation tone setting Job End Job completed tone settingReady ? Off Error ? On Ready Preparation completed tone settingError Error tone setting RAM Disk Mode Using the RAM disk RAM Disk Mode ? OffRAM Disk Size Setting the RAM disk size RAM Disk Size 119 MByteHard Disk Format Formatting hard disk Memory Card Using the memory cardFormat ? Memory CardError Handling Error Handling Error detection settingFormat Formatting memory card Duplex Duplex printing error detection setting Duplex ? Off Paper Mismatch ? OnOff Timer Form Feed Time Out 030sec Timer Timer settingForm Feed Time Out Automatic form feed timeout setting Sleep Timer Sleep timer timeout time Sleep Timer 030 minAuto Error Clear Auto error clear setting Auto Error Clear ? OffError Clear Timer Setting the error clear time Auto Panel Reset Auto panel reset settingsPanel Reset Timer Setting the panel reset timer Auto Sleep ? On Auto Sleep Setting the sleep timerSecurity ID Administrator ID inputUSB Host USB memory slot setting Password Block USB Host ? UnblockPassword Administrator Password input Block Interface external device block settingUSB Device USB interface setting Optional Interface Network interface card settingUSB Device ? Unblock Option I/F ? Unblock NetWare NetWare setting Frame Type Frame type settingNetWare ? On Frame Type ? Auto IPP ? Off AppleTalk AppleTalk settingIPP IPP setting AppleTalk AppleTalk ? OnSSL Server SSL Server setting DES SSL Server DES settingSSL Server ? Off DES ? Off 3DES ? Off AES ? Off IPP over SSL ? Off 3DES SSL Server 3DES settingAES SSL Server AES setting IPP over SSL SSL Server IPP over SSL settingHttps ? Off IPSec IPSec ? Off IPSec IPSec settingSecurity Level Security Level setting Https SSL Server Https settingJob Accounting Job Accounting Job Accounting selection/ settingJob Accounting Enabled Password Job Accounting ? Off Enter AccountSelect Account Department-specific settings Select Account ?00000000 Counter 0000100 Color CounterColor Counter Account-specific counter management color Restriction ? Off Color Restrict ? Off Set the account ID and then press U or V repeatedly untilColor Restrict Print restriction selection color Maximum Output Color Max.out Reset Counter? Color Max.out Maximum print output setting colorReset Counter Counter reset Add Account Delete Account ?001 Add Account Department registrationDelete Account Department removal Print Job Accounting List Job Accounting list output Admin Admin Administrator settings002 Password Change IDChange ID Administrator ID change You can use this to change the administrator IDChange Password Change Password Administrator Password changeYou can use this to change the administrator password Color Calibration Adjust/Maintenance Adjust/Maintenance selection/settingAdjust/ Maintenance Color Calibration ?Registration Normal Color registration standard Print Registra tion Chart ?Color Registration Correction Chart Sample Color Registration Correction ChartPress U or V until that value is displayed Adjust Magenta L=0 V=0 R=0Adjust Magenta L=B V=0 R=0 Adjust MagentaRegistration Details Color registration detailed Page 12345 3 Adjust magenta 12345 MV=0 MH=0000012345 MH=B0000 MV=0 Restart Printer ? Restart Printer12345 3 Cyan correction and Y 12345 3 Yellow correction Print Network Status Page Printing the network status Service Print Status Page ? Print Network Status Page ?Service for maintenance Print Status Page Printing the service statusPrint Test Page ? Maintenance ? DEV-CLN Developer/Refresh mode settingPrint Test LSU/Charger ? Drum ? LSU/Charger LSU/Main charger cleaning mode settingWhen cleaning ends, the display returns to Ready Drum Drum/Refresh mode settingOptions OptionsGeneral Information Expansion Memory Modules Expansion Memory ModulesRemoving a Memory Module Installing the Memory ModulesReading the Memory Card General Description of OptionsMemory Card PF-500, PF-510 Paper FeederHard Disk Base CA-500USB Memory Options Computer Interface Interface USB Interface Network InterfaceComputer Interface USB Interface SpecificationsInterface Signals InterfaceNetwork Interface FeaturesOperation Environment 10 to 35 C 50 to 95 F, 20-80 % RH condensation-freeEMI Countermeasures Description FS-C5100DN FS-C5200DN FS-C5300DN SpecificationsMP Tray Paper Sizes CassetteISO B5, A6, Envelope C5, 16K, and Custom Folio, Youkei 2, Youkei 4, 16K, and CustomDescription FS-C5100DN FS-C5200DN FS-C5300DN Specifications Glossary MP Tray NetBEUI NetBIOS Extended User InterfaceSleep mode IP Address Internet Protocol AddressUSB Universal Serial Bus StatusSubnet Mask TCP/IP Transmission Control Protocol/Internet ProtocolGlossary-4 Index-1 IndexPaper Index-2Index-3 TimerIndex-4 Page Page Version 1.1

Related manuals

Manual 80 pages 19.09 Kb