Kyocera FS-C5100DN, FS-C5300DN, FS-C5200DN manual Expansion Memory Modules

YES

NO

Expansion Memory Modules

The printer's main controller board has a memory slot into which you can plug in optional memory modules (dual in line memory modules). You can increase the printer's memory up to 1280 MB by plugging in the optional memory modules.

Note A 256 MB memory module is already installed at the factory. To expand memory up to 1280 MB, install 1024 MB memory module.

Expansion Memory Modules

You can select additional memory modules from 128, 256, 512 or 1024 MB. The maximum memory size is 1024 MB.

Precautions for Handling the Printer's Main Controller Board and Memory Modules

To protect electronic parts, discharge static electricity from your body by touching a water pipe (faucet) or other large metal object before handling the memory modules. Or, wear an antistatic wrist strap, if possible, when you install the memory modules.

Always hold the main controller board or a memory module by its edges as shown below to avoid damaging electronic parts.

Options 7-3