Kyocera FS-1100, FS-1300D manual Maintenance Indication, Meaning Remedy

Indicator

Maintenance Indication

The table below shows the indicator combinations when user intervention is required. It is assumed that the printer is online and is processing data.

Meaning	Remedy
There is no paper in the cassette,	Load paper into the paper source.
MP tray, or Manual Feed.
The cassette is not inserted	Insert the cassette fully into the printer.
properly.

The top cover is open.	Close the cover.
There is no cassette in the paper	Re-insert the cassette and then try
feeder or the cassette specified as	printing again.
a paper supply is not inserted
properly.
The develper unit or toner	Install the develper unit or toner
container is not installed.	container.
The cassette does not contain the	Load the paper into the cassette (#[1 or
paper specified by the printer	2]) and then restart printing. You can
driver.	change the paper source by pressing
	the [GO].
The paper sizes do not match.	If the paper size in the paper source
	differs from the paper size and type
	specified by the printer driver, you can
	print by supplying paper from the MP
	tray or Manual Feed. Load the correct
	paper size and type into the MP tray or
	Manual Feed and press [GO] to begin
	printing.
	If you want to supply paper from a
	source other than the MP tray or
	Manual Feed, you can change the
	paper source by pressing [GO].
	If the paper fed from the MP tray or
	Manual Feed is a different size from the
	specified paper size, a paper jam will
	occur.
A paper jam occurred during	Open the printer cover and remove the
printing.	jammed paper.

Troubleshooting 5-7