NEC LCD4010, LCD4610, LCD4610, LCD4610 user manual Setup Procedure

Page 11

Setup Procedure

English

1. Determine the installation location

CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF.

Installing your LCD display must be done by a qualified technician. Contact your dealer for more information.

CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.

Failure to follow this caution may result in injury if the LCD monitor falls.

CAUTION: Do not mount or operate the display upside down, face up, or face down.

CAUTION: This LCD has a temperature sensor and cooling fan. If the LCD becomes too hot, the cooling fan will turn on automatically. If the LCD becomes overheated and the cooling fan is running, the “Caution” menu will appear. If the “Caution” menu appears, discontinue use and allow the unit to cool. When the LCD monitor is used in an enclosure or with protection on LCD surface, please check the inside temperature of monitor by “HEAT STATUS” (See page 28). The temperature is too hot than normal condition, please set “cooling fan” to ON on SCREEN SAVER function (See page 24).

IMPORTANT: Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Install the remote control batteries

The remote control is powered by 1.5V AA batteries. To install or replace batteries:

1.Press and slide to open the cover.

2.Align the batteries according to the (+) and (–) indications inside the case.

3.Replace the cover.

CAUTION: Incorrect use of batteries can result in leaks or bursting.

Be careful especially about the following points.

•Place “AA” size batteries matching the + and - signs on each battery to the + and - signs of the battery compartment.

•Don’t mix battery types.

•Don’t combine new batteries with used ones.

It causes shorter battery life or leakage of batteries.

•Remove dead batteries immediately to prevent battery liquid from leaking into the battery compartment.

Don’t touch exposed battery acid, it cause damage to your skin.

NOTE: If you do not intend to use the Remote Control for a long period, remove the batteries.

3. Connect external equipment (See pages 12-17)

•To protect the connected equipment, turn off the main power before making connections.

•Refer to your equipment user manual.

4. Connect the supplied power cord

•The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

•Fully insert the prongs into the power outlet socket. Loose connection may cause noise.

•Please fix the power cord by attaching the screw and clamper.

NOTE: Please refer to “Safety Precautions, Maintenance & Recommended Use” section of this manual for proper selection of AC power cord.

Screw Clamper

Screw hole for clamper

5.Switch on the power of all attached external equipment

When connected with a computer, switch on the power of the computer first.

6. Operate the attached external equipment

Display the signal on the external equipment you wish.

7. Adjust the sound

Make adjustments when adjustment of the volume is required.

8. Adjust the screen (See pages 20-28)

Make adjustments when adjustment of the screen display position or distortion is required.

9. Adjust the image (See pages 20-28)

Make adjustments when picture adjustment such as the brightness or contrast is required.

English-9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MultiSync LCD4010 Advanced Option IndexEnglish-1 Canadian Department of Communications Compliance StatementFCC Information Declaration of the Manufacturer Important InformationDeclaration Disposing of your old NEC productEnglish-3 Safety Precautions, Maintenance & Recommended UseRecommended Use ErgonomicsContents Control Panel Parts Name and FunctionsTerminal Panel Wireless Remote Control English-8 Operating Range for the Remote ControlHandling the remote control Setup Procedure When using external speakers Recommended AdjustmentWhen the monitor is installed in the portrait position Installing and removing standVentilation Requirements for enclosure mounting How to Mount and Attach Options to the LCD MonitorTo prevent the main power switch from being changed Upright position Lay the screen face downEnglish-12 Wiring DiagramConnections Before making connectionsEnglish-13 Connecting a Personal ComputerConnect the LCD Monitor to a Personal Computer English-14 Connecting to a Macintosh ComputerConnect the LCD Monitor to Macintosh English-15 Connecting with Digital Interface EquipmentConnect the LCD Monitor to a Computer with a Digital Output English-16 Connecting a DVD Player with component outConnect the LCD Monitor to a DVD Player English-17 Connecting to a Stereo AmplifierConnect the LCD Monitor to a Stereo Amplifier Basic Operation Power on and OFF ModesPressing the power button Using the remote control Pressing the Main Power SwitchInformation OSM Power IndicatorUsing Power Management Picture ModeEnglish-20 OSM On-Screen-Manager ControlsPicture English-21 TintEnglish-22 Zoom ModeScreen Reset AudioEnglish-23 Picture in PictureScreen Saver ConfigurationReset Factory ResetManual OFF TimerDVI Mode Long CableAdvanced Option Input DetectMonitor InformationScan Conversion Scan ModeFilm Mode Image FlipRecommendations For long life use of Public DisplayImage Sticking of LCD Panel Set Monitor ID English-29Connect a PC and MultiSync LCD4010 / MultiSync LCD4610 English-30 ConnectionEnglish-31 Power onEnglish-32 FeaturesTroubleshooting Analog Input Digital Input Specifications for MultiSync LCD4010Product Specifications English-34English-35 Specifications for MultiSync LCD4610Mini D-SUB 15P Pin Assignment of DVI connectorPin Assignment English-36

LCD4010, LCD4610, LCD4610, LCD4610 specifications

The NEC LCD4610 is a high-performance large-format display designed for a variety of applications, including commercial signage, corporate environments, and broadcast environments. Known for its impressive visual quality and reliability, the LCD4610 is part of NEC's extensive lineup of professional-grade LCDs.

One of the standout features of the LCD4610 is its high resolution. With a native resolution of 1920 x 1080 pixels, this display provides sharp and detailed images, making it suitable for displaying intricate graphics and video content. The 46-inch diagonal screen size offers ample space for visual content while remaining manageable for various installation settings.

In terms of technology, the LCD4610 utilizes advanced LCD panel technology, which ensures excellent color reproduction and wide viewing angles. The display features a high brightness rating, allowing it to perform well in brightly lit environments. The anti-glare surface treatment is an additional advantage, reducing reflections and enhancing visibility for viewers in diverse lighting conditions.

Another notable characteristic of the LCD4610 is its durability. The design incorporates a robust build, ensuring that it can withstand the demands of constant use in public spaces or busy work environments. Its longevity is further enhanced by the inclusion of features such as temperature regulation and integrated cooling systems, which help maintain optimal operating conditions.

Moreover, the NEC LCD4610 supports a range of connectivity options, including HDMI, DisplayPort, and DVI inputs. This flexibility makes it easy to integrate the display into existing systems or to connect various sources, whether for presentations or multimedia displays. The display is also capable of handling different video signals, which adds to its versatility for varied applications.

The LCD4010 model, while slightly smaller, shares many of the characteristics found in the LCD4610. It also features high resolution and excellent color accuracy, making it suitable for similar applications although it is ideal for spaces where a more compact display is needed. Both models exemplify NEC's commitment to quality and innovation in the display market, making them reliable choices for any organization looking to enhance its visual communications.
Top Page Image Contents