NEC LCD4010, LCD4610, LCD4610, LCD4610 user manual Troubleshooting

Page 35

Troubleshooting

No picture

•The signal cable should be completely connected to the display card/computer.

•The display card should be completely seated in its slot.

•Front Power Switch and computer power switch should be in the ON position.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

•Check the monitor and your display card with respect to compatibility and recommended settings.

•Check the signal cable connector for bent or pushed-in pins.

Power Button does not respond

•Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

Image persistence

•Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Image is unstable, unfocused or swimming is apparent

•Signal cable should be completely attached to the computer.

•Use the OSM Image Adjust controls to focus and adjust display by increasing or decreasing the fine adjustment. When the display mode is changed, the OSM Image Adjust settings may need to be re-adjusted.

•Check the monitor and your display card with respect to compatibility and recommended signal timings.

•If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.

Image of component signal is greenish

•Check to see if the DVD/HD input connector is selected.

LED on monitor is not lit (no green or red colour can be seen)

•Power Switch should be in the ON position and power cord should be connected.

•Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

RED LED on monitor is blinking

•A certain failure might have occurred, please contact your nearest authorized NEC DISPLAY SOLUTIONS service facility.

Display image is not sized properly

•Use the OSM Image Adjust controls to increase or decrease the coarse adjustment.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

Selected resolution is not displayed properly

•Use OSM Display Mode to enter Information menu and confirm that the appropriate resolution has been selected. If not, select corresponding option.

No Sound

•Check to see if speaker cable is properly connected.

•Check to see if mute is activated.

•Check to see if volume is set at minimum.

Remote Control is not available

•Check the Remote Control’s batteries status.

•Check if batteries are inserted correctly.

•Check if the Remote Control is pointing at the monitor’s remote sensor.

•The remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor of the LCD monitor, or when there is an object in the path.

“SCHEDULE”/“OFF TIMER” function is not working properly

•The “SCHEDULE” function will be disabled when the “OFF TIMER” is set.

•If the “OFF TIMER” function is enable and the power to the LCD monitor is turned off if the power supply is interrupted unexpectedly, then the “OFF TIMER” will be reset.

Either light vertical or horizontal stripes may appear, depending on the specific display pattern. This is no product fault or degradation.

English-33

English

Page 34 Page 36
Image 35
Page 34 Page 36
Contents MultiSync LCD4010 Advanced Option IndexEnglish-1 Canadian Department of Communications Compliance StatementFCC Information Declaration of the Manufacturer Important InformationDeclaration Disposing of your old NEC productEnglish-3 Safety Precautions, Maintenance & Recommended UseRecommended Use ErgonomicsContents Control Panel Parts Name and FunctionsTerminal Panel Wireless Remote Control English-8 Operating Range for the Remote ControlHandling the remote control Setup Procedure When using external speakers Recommended AdjustmentWhen the monitor is installed in the portrait position Installing and removing standVentilation Requirements for enclosure mounting How to Mount and Attach Options to the LCD MonitorTo prevent the main power switch from being changed Upright position Lay the screen face downEnglish-12 Wiring DiagramConnections Before making connectionsEnglish-13 Connecting a Personal ComputerConnect the LCD Monitor to a Personal Computer English-14 Connecting to a Macintosh ComputerConnect the LCD Monitor to Macintosh English-15 Connecting with Digital Interface EquipmentConnect the LCD Monitor to a Computer with a Digital Output English-16 Connecting a DVD Player with component outConnect the LCD Monitor to a DVD Player English-17 Connecting to a Stereo AmplifierConnect the LCD Monitor to a Stereo Amplifier Basic Operation Power on and OFF ModesPressing the power button Using the remote control Pressing the Main Power SwitchInformation OSM Power IndicatorUsing Power Management Picture ModeEnglish-20 OSM On-Screen-Manager ControlsPicture English-21 TintEnglish-22 Zoom ModeScreen Reset AudioEnglish-23 Picture in PictureScreen Saver ConfigurationReset Factory ResetManual OFF TimerDVI Mode Long CableAdvanced Option Input DetectMonitor InformationScan Conversion Scan ModeFilm Mode Image FlipRecommendations For long life use of Public DisplayImage Sticking of LCD Panel Set Monitor ID English-29Connect a PC and MultiSync LCD4010 / MultiSync LCD4610 English-30 ConnectionEnglish-31 Power onEnglish-32 FeaturesTroubleshooting Analog Input Digital Input Specifications for MultiSync LCD4010Product Specifications English-34English-35 Specifications for MultiSync LCD4610Mini D-SUB 15P Pin Assignment of DVI connectorPin Assignment English-36

LCD4010, LCD4610, LCD4610, LCD4610 specifications

The NEC LCD4610 is a high-performance large-format display designed for a variety of applications, including commercial signage, corporate environments, and broadcast environments. Known for its impressive visual quality and reliability, the LCD4610 is part of NEC's extensive lineup of professional-grade LCDs.

One of the standout features of the LCD4610 is its high resolution. With a native resolution of 1920 x 1080 pixels, this display provides sharp and detailed images, making it suitable for displaying intricate graphics and video content. The 46-inch diagonal screen size offers ample space for visual content while remaining manageable for various installation settings.

In terms of technology, the LCD4610 utilizes advanced LCD panel technology, which ensures excellent color reproduction and wide viewing angles. The display features a high brightness rating, allowing it to perform well in brightly lit environments. The anti-glare surface treatment is an additional advantage, reducing reflections and enhancing visibility for viewers in diverse lighting conditions.

Another notable characteristic of the LCD4610 is its durability. The design incorporates a robust build, ensuring that it can withstand the demands of constant use in public spaces or busy work environments. Its longevity is further enhanced by the inclusion of features such as temperature regulation and integrated cooling systems, which help maintain optimal operating conditions.

Moreover, the NEC LCD4610 supports a range of connectivity options, including HDMI, DisplayPort, and DVI inputs. This flexibility makes it easy to integrate the display into existing systems or to connect various sources, whether for presentations or multimedia displays. The display is also capable of handling different video signals, which adds to its versatility for varied applications.

The LCD4010 model, while slightly smaller, shares many of the characteristics found in the LCD4610. It also features high resolution and excellent color accuracy, making it suitable for similar applications although it is ideal for spaces where a more compact display is needed. Both models exemplify NEC's commitment to quality and innovation in the display market, making them reliable choices for any organization looking to enhance its visual communications.
Top Page Image Contents