NEC LCD4010, LCD4610 English-29, Connect a PC and MultiSync LCD4010 / MultiSync LCD4610

Page 31

3.Reducing the environmental temperature is effective for long life use.

When Protection board (glass, acryl) is installed over the LCD surface, enclosed into the box / wall, or stack the monitor, please utilize the temperature sensors inside monitor.

To reduce the environmental temperature, the monitor should be set Low Brightness or Cooling Fan "ON" by using Screen sever Function.

4.Please use "Screen Saver Mode" of monitor.

NOTE 2: MONITOR ID and IR CONTROL

Using the one PC or one infra-red wireless controller, you can control up to 26 MultiSync LCD4010 / MultiSync LCD4610 that are connected by daisy chained RS-232C.

1.Connect a PC and MultiSync LCD4010 / MultiSync LCD4610.

Connect a PC’s RS-232C control output to the MultiSync LCD4010’s / MultiSync LCD4610’s RS-232C input.

You can connect other MultiSync LCD4010 / MultiSync LCD4610; Connect MultiSync LCD4010’s / MultiSync LCD4610’s RS-232C output to other MultiSync LCD4010’s / MultiSync LCD4610’s RS-232C input. (Refer to page 30).

2.Set Monitor ID.

Set “MONITOR ID” in the “ADVANCED OPTION” menu.

“MONITOR ID” should be set to a unique number on all daisy chained MultiSync LCD4010 / MultiSync LCD4610 from 1 to 26. We recommend numbering continuously from 1 in a sequential number.

Set “PRIMARY” to “IR CONTROL” in the “ADVANCED OPTION” menu on the first of the daisy chained monitors. Set “SECONDERY” to “IR CONTROL” on other monitors.

3.Press “DISPLAY” button aiming at the “PRIMARY” monitor then ID select OSM will be shown at top left side of the screen.

English

ID: 1 <- ID number itself.

 

ID: 1

ID No.: 1 <- ID number of the controllable monitor.

ID No: 2

 

Press “+” button to increase this “ID No.”.

 

Press “-” button to decrease it.

 

If you control all the daisy-chained monitors at the same time,

 

please select “ID No.” “ALL”.

 

 

4.Operate wireless remote controller with aiming at the “PRIMARY” monitor. The “MENU OSD” will appear on the selected ID No.’s monitor.

Monitor ID

"Monitor ID" which you want to control

NOTE: If “ID No.” select OSM is showing at the “PRIMARY” monitor, press “DISPLAY” button to clear this OSM.

HINT: If you lost control by a reason of wrong setting “IR CONTROL”, keep pressing during 5 sec or more the “DISPLAY” button. The monitor will reset “IR CONTROL” to “NORMAL”.

NOTE 3: HOW TO SETUP SCHEDULE

Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be activated. You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input source the monitor will use for each scheduled activation period. A check mark in the box next to the number of the schedule indicates that the selected schedule is in effect.

To select which schedule to set, use the up/down arrows to move the red bar vertically under the number (1 to 7) of the schedule.

Use the (+) and (-) buttons to move the red bar horizontally within the particular schedule. The “SET” button is used to make a selection. If you create a schedule but do not want to use a power on time, select “--” in the “ON” time slot.

If you do not want to use a power off time select “--” in the OFF time slot.

If there is no input selected (“--” showing in the input spot) the input from the previous schedule will be used.

The selection of EVERY DAY within a schedule takes priority over other schedules that are set up to operate weekly. When schedules are overlapping, scheduled Power ON time has priority over scheduled Power OFF time.

If there are two schedules programmed for the same time, then the highest numbered schedule has priority. When the “OFF TIMER” (see page 25) is set, the “SCHEDULE” function is disabled.

English-29

Image 31
Contents MultiSync LCD4010 Advanced Option IndexFCC Information Canadian Department of Communications Compliance StatementEnglish-1 Declaration of the Manufacturer Important InformationDeclaration Disposing of your old NEC productEnglish-3 Safety Precautions, Maintenance & Recommended UseRecommended Use ErgonomicsContents Control Panel Parts Name and FunctionsTerminal Panel Wireless Remote Control Handling the remote control Operating Range for the Remote ControlEnglish-8 Setup Procedure When using external speakers Recommended AdjustmentWhen the monitor is installed in the portrait position Installing and removing standVentilation Requirements for enclosure mounting How to Mount and Attach Options to the LCD MonitorTo prevent the main power switch from being changed Upright position Lay the screen face downEnglish-12 Wiring DiagramConnections Before making connectionsConnect the LCD Monitor to a Personal Computer Connecting a Personal ComputerEnglish-13 Connect the LCD Monitor to Macintosh Connecting to a Macintosh ComputerEnglish-14 Connect the LCD Monitor to a Computer with a Digital Output Connecting with Digital Interface EquipmentEnglish-15 Connect the LCD Monitor to a DVD Player Connecting a DVD Player with component outEnglish-16 Connect the LCD Monitor to a Stereo Amplifier Connecting to a Stereo AmplifierEnglish-17 Basic Operation Power on and OFF ModesPressing the power button Using the remote control Pressing the Main Power SwitchInformation OSM Power IndicatorUsing Power Management Picture ModePicture OSM On-Screen-Manager ControlsEnglish-20 English-21 TintEnglish-22 Zoom ModeScreen Reset AudioEnglish-23 Picture in PictureScreen Saver ConfigurationReset Factory ResetManual OFF TimerDVI Mode Long CableAdvanced Option Input DetectMonitor InformationScan Conversion Scan ModeFilm Mode Image FlipImage Sticking of LCD Panel For long life use of Public DisplayRecommendations Connect a PC and MultiSync LCD4010 / MultiSync LCD4610 English-29Set Monitor ID English-30 ConnectionEnglish-31 Power onEnglish-32 FeaturesTroubleshooting Analog Input Digital Input Specifications for MultiSync LCD4010Product Specifications English-34English-35 Specifications for MultiSync LCD4610Mini D-SUB 15P Pin Assignment of DVI connectorPin Assignment English-36

LCD4010, LCD4610, LCD4610, LCD4610 specifications

The NEC LCD4610 is a high-performance large-format display designed for a variety of applications, including commercial signage, corporate environments, and broadcast environments. Known for its impressive visual quality and reliability, the LCD4610 is part of NEC's extensive lineup of professional-grade LCDs.

One of the standout features of the LCD4610 is its high resolution. With a native resolution of 1920 x 1080 pixels, this display provides sharp and detailed images, making it suitable for displaying intricate graphics and video content. The 46-inch diagonal screen size offers ample space for visual content while remaining manageable for various installation settings.

In terms of technology, the LCD4610 utilizes advanced LCD panel technology, which ensures excellent color reproduction and wide viewing angles. The display features a high brightness rating, allowing it to perform well in brightly lit environments. The anti-glare surface treatment is an additional advantage, reducing reflections and enhancing visibility for viewers in diverse lighting conditions.

Another notable characteristic of the LCD4610 is its durability. The design incorporates a robust build, ensuring that it can withstand the demands of constant use in public spaces or busy work environments. Its longevity is further enhanced by the inclusion of features such as temperature regulation and integrated cooling systems, which help maintain optimal operating conditions.

Moreover, the NEC LCD4610 supports a range of connectivity options, including HDMI, DisplayPort, and DVI inputs. This flexibility makes it easy to integrate the display into existing systems or to connect various sources, whether for presentations or multimedia displays. The display is also capable of handling different video signals, which adds to its versatility for varied applications.

The LCD4010 model, while slightly smaller, shares many of the characteristics found in the LCD4610. It also features high resolution and excellent color accuracy, making it suitable for similar applications although it is ideal for spaces where a more compact display is needed. Both models exemplify NEC's commitment to quality and innovation in the display market, making them reliable choices for any organization looking to enhance its visual communications.