NEC LCD4610, LCD4610, LCD4010, LCD4610 user manual Connection, English-30

Page 32

Controlling the LCD monitor via RS-232C Remote Control

This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.

Functions that can be controlled by a personal computer are:

•Power ON or OFF

•Switching between input signals

Connection

LCD Monitor + PC

 

to RS-232C

from RS-232C

to RS-232C

from RS-232C

PC

“IN” terminal

“OUT” terminal

“IN” terminal

“OUT” terminal

 

 

 

 

RS-232C Cable

RS-232C Cable

Next MultiSync LCD4010 /

MultiSync LCD4610 RS-232C

“IN” terminal

NOTE: If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your dealer for details.

* RS-232C OUT terminal can connect MultiSync LCD4010 / MultiSync LCD4610 only. Do not connect other equipment.

The following control sequence is used for a single MultiSync LCD4010 / MultiSync LCD4610. To control multiple MultiSync LCD4010 / MultiSync LCD4610 monitors that are daisy-chained together please use the extended control command. Instructions for the extended control command can be found on the CD included with the display. The file is called “External_control_LCD4X10.pdf”. When using the following control commands, all of the daisy-chained monitors can be controlled at the same time from one monitor. Reply and status commands, however, will only pertain to the primary monitor, not secondary monitors.

1) Interface

PROTOCOL

RS-232C

BAUD RATE

9600 [bps]

 

 

DATA LENGTH

8 [bits]

 

 

PARITY BIT

NONE

 

 

STOP BIT

1 [bits]

FLOW CONTROL

NONE

 

 

This LCD monitor uses RXD, TXD and GND lines for RS-232C control.

2)Control command diagram

The command is structured by the address code, function code, data code and end code. The length of the command is different for each function.

 

Address code

Function code

Data code

 

End code

 

HEX

30h 30h

Function

Data

 

0Dh

 

 

 

 

 

 

 

 

ASCII

'0' '0'

Function

Data

 

 

 

 

 

 

 

 

 

 

[Address code]

30h 30h (ASCII code, '0' '0'), fixed.

 

[Function code]

A code of each fixed control move.

 

[Data code]

A code of each fixed control data (number) and not always indicated.

 

[End code]

0Dh (In ASCII code, '

') fixed.

English-30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents MultiSync LCD4010 Index Advanced OptionEnglish-1 Canadian Department of Communications Compliance StatementFCC Information Important Information DeclarationDisposing of your old NEC product Declaration of the ManufacturerSafety Precautions, Maintenance & Recommended Use Recommended UseErgonomics English-3Contents Parts Name and Functions Control PanelTerminal Panel Wireless Remote Control English-8 Operating Range for the Remote ControlHandling the remote control Setup Procedure Recommended Adjustment When the monitor is installed in the portrait positionInstalling and removing stand When using external speakersHow to Mount and Attach Options to the LCD Monitor To prevent the main power switch from being changedUpright position Lay the screen face down Ventilation Requirements for enclosure mountingWiring Diagram ConnectionsBefore making connections English-12English-13 Connecting a Personal ComputerConnect the LCD Monitor to a Personal Computer English-14 Connecting to a Macintosh ComputerConnect the LCD Monitor to Macintosh English-15 Connecting with Digital Interface EquipmentConnect the LCD Monitor to a Computer with a Digital Output English-16 Connecting a DVD Player with component outConnect the LCD Monitor to a DVD Player English-17 Connecting to a Stereo AmplifierConnect the LCD Monitor to a Stereo Amplifier Power on and OFF Modes Pressing the power buttonUsing the remote control Pressing the Main Power Switch Basic OperationPower Indicator Using Power ManagementPicture Mode Information OSMEnglish-20 OSM On-Screen-Manager ControlsPicture Tint English-21Zoom Mode Screen ResetAudio English-22Picture in Picture English-23Configuration ResetFactory Reset Screen SaverOFF Timer DVI ModeLong Cable ManualInput Detect MonitorInformation Advanced OptionScan Mode Film ModeImage Flip Scan ConversionRecommendations For long life use of Public DisplayImage Sticking of LCD Panel Set Monitor ID English-29Connect a PC and MultiSync LCD4010 / MultiSync LCD4610 Connection English-30Power on English-31Features English-32Troubleshooting Specifications for MultiSync LCD4010 Product SpecificationsEnglish-34 Analog Input Digital InputSpecifications for MultiSync LCD4610 English-35Pin Assignment of DVI connector Pin AssignmentEnglish-36 Mini D-SUB 15P

LCD4010, LCD4610, LCD4610, LCD4610 specifications

The NEC LCD4610 is a high-performance large-format display designed for a variety of applications, including commercial signage, corporate environments, and broadcast environments. Known for its impressive visual quality and reliability, the LCD4610 is part of NEC's extensive lineup of professional-grade LCDs.

One of the standout features of the LCD4610 is its high resolution. With a native resolution of 1920 x 1080 pixels, this display provides sharp and detailed images, making it suitable for displaying intricate graphics and video content. The 46-inch diagonal screen size offers ample space for visual content while remaining manageable for various installation settings.

In terms of technology, the LCD4610 utilizes advanced LCD panel technology, which ensures excellent color reproduction and wide viewing angles. The display features a high brightness rating, allowing it to perform well in brightly lit environments. The anti-glare surface treatment is an additional advantage, reducing reflections and enhancing visibility for viewers in diverse lighting conditions.

Another notable characteristic of the LCD4610 is its durability. The design incorporates a robust build, ensuring that it can withstand the demands of constant use in public spaces or busy work environments. Its longevity is further enhanced by the inclusion of features such as temperature regulation and integrated cooling systems, which help maintain optimal operating conditions.

Moreover, the NEC LCD4610 supports a range of connectivity options, including HDMI, DisplayPort, and DVI inputs. This flexibility makes it easy to integrate the display into existing systems or to connect various sources, whether for presentations or multimedia displays. The display is also capable of handling different video signals, which adds to its versatility for varied applications.

The LCD4010 model, while slightly smaller, shares many of the characteristics found in the LCD4610. It also features high resolution and excellent color accuracy, making it suitable for similar applications although it is ideal for spaces where a more compact display is needed. Both models exemplify NEC's commitment to quality and innovation in the display market, making them reliable choices for any organization looking to enhance its visual communications.
Top Page Image Contents