NEC user manual Monitor AccuSync LCD19WMGX Specifications

Specifications

Monitor		AccuSync LCD19WMGX		Notes
Specifications		Monitor
LCD Module	Diagonal:	19.0 inch	Active matrix; thin film transistor (TFT)
Viewable Image Size:		19.0 inch	liquid crystal display (LCD); 0.285 mm dot
Native Resolution (Pixel Count):		1440 x 900	pitch; 400cd/m2 white luminence;
			1000:1 contrast ratio, typical;
Time			5ms response
Input Signal	Video:	ANALOG 0.7 Vp-p/75 Ohms	Digital Input: DVI-D with HDCP
		Sync:Separate sync TTL Level (Positive/Negtive)
		Horizontal sync Positive/Negative
		Vertical sync Positive/Negative
Display Colors	Analog input:	16.7M	Depending on display card used.
Maximum	Left/right:	85°/85° (CR>10)
Viewing Angles	Up/Down:	80°/80° (CR>10)
Synchronization	Horizontal:	30.0 kHz to 83.0 kHz	Automatically
Range	Vertical:	55 Hz to 75 Hz	Automatically
Resolutions Supported	Analog and	720 x 400: at 70 Hz	Some systems may not support
	Digital Input:	640 x 480: 60 Hz to 75 Hz	all modes listed.
		800 x 600: 56 Hz to 75 Hz
		832 x 624: at 75 Hz
		1024 x 768: 60 Hz to 75 Hz
		1152 x 864: at 75Hz
		1280 x 768: at 60 Hz
		1280 x 960: at 60Hz
		1280 x 1024: 60 Hz to 75 Hz
		1440 x 900: at 60Hz..................................NEC DISPLAY SOLUTIONS cites
			recommended resolution at 60 Hz for
			optimal display performance
.
	HDTV:	480p(60Hz), 576p(50Hz), 720p(50Hz), 1080i(60Hz)*2, 1080p(60Hz)*2
Active Display Area	Horizontal :	410.4 mm/16.2 inches
	Vertical :	256.5 mm/10.1 inches
Power Supply		100-240 V - 50/60 Hz
Current Rating		0.75-0.4A/100-240V
Speaker Practical Audio Output		1+1 Watts
Dimensions		440.0mm (W) x 363.0mm (H) x 210.0mm (D)
		17.3 inches (W) x 14.3 inches (H) x 8.3 inches (D)
Weight		4.5 kg
		9.9 lbs
Environmental Considerations
Operating Temperature:		5°C to 35°C/41°F to 95°F
	Humidity:	30% to 80%
	Altitude:	4,572 m to 15,000 Feet
Storage Temperature:		-10°C to +60°C/14°F to 140°F
	Humidity:	10% to 85%
	Altitude:	12,192 m to 40,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current fl at panel technologies when displaying non-native resolutions full screen. In fl at panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

*2 Compressed image

NOTE: Technical specifications are subject to change without notice.

12