| OFF MODE SETTING | Adjusts the ILLUMINANCE value for OFF MODE. Shows illuminance. |
|
|
|
| LED BRIGHTNESS*2 | Controls the brightness of the power LED on the monitor. |
| LED COLOR*2 | Toggles the power LED on the front between blue or green. |
Tag7 | LANGUAGE*2 | OSD control menus are available in nine languages. Press “LEFT” or “RIGHT” to select. |
| OSD H.POSITION | You can choose where you would like the OSD control image to appear on your screen. |
|
| Selecting OSD Location allows you to manually adjust the position of the OSD control |
|
| menu left or right. |
|
|
|
| OSD V.POSITION | You can choose where you would like the OSD control image to appear on your screen. |
|
| Selecting OSD Location allows you to manually adjust the position of the OSD control |
|
| menu up or down. |
|
|
|
| OSD TURN OFF | The OSD control menu will stay on as long as it is use. You can select how long the |
|
| monitor waits after the last touch of a button to shut off the OSD control menu. |
|
| The preset choices are |
|
|
|
| OSD LOCK OUT*2 | This control completely locks out access to all OSD control functions. When attempting |
|
| to activate OSD controls while in the Lock Out mode, a screen will appear indicating the |
|
| OSD controls are locked out. |
|
| There are three types of OSD LOCK OUT: |
|
| OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT, |
|
| then “RIGHT” button and hold down simultaneously. To deactivate the OSD Lock Out, |
|
| press SELECT, then “RIGHT” button and hold down simultaneously while in the OSD |
|
| menu. No controls can be adjusted while in the lock out mode. |
|
| OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock |
|
| Out function, press SELECT, then “DOWN” and “LEFT” buttons and hold down |
|
| simultaneously. To deactivate the OSD Lock Out, press SELECT, then “DOWN” and |
|
| “LEFT” buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS |
|
| can be adjusted while in the lock out mode. |
|
| CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or |
|
| DISABLE for POWER KEY, INPUT SEL, HOT KEY (BRIGHTNESS), PICTURE MODE, |
|
| WARNING (RESOLUTION NOTIFIER/OSD LOCK OUT). To Deactivate the OSD Lock |
|
| Out function, press RESET and EXIT to bring up the LOCK OUT warning. |
|
| Press SELECT, SELECT, <, >, <, >, EXIT. |
|
|
|
| OSD TRANSPARENCY | Adjusts the transparency of the OSD MENU. |
|
|
|
| OSD COLOR*2 | “Tag window frame color”, “Item select color” & ”Adjust Window frame color” can be |
|
| changed. |
|
|
|
| BOOT LOGO*2 | The NEC logo is briefl y displayed after the monitor is powered on. This feature can be |
|
| turned on or off in the OSD. |
|
| Note: If the “EXIT” button is kept pressed while NEC logo is displayed, the BOOT LOGO |
|
| menu will appear. It is possible to change the BOOT LOGO setting to OFF. |
|
|
|
| SIGNAL | Signal information can be displayed in the corner of the screen. |
| INFORMATION*2 | Signal information is either “ON/OFF”. |
| RESOLUTION | The optimal resolution is 1920 x 1080 for PA231W, 1920 x 1200 for PA241W, |
| NOTIFIER*2 | 2560 x 1440 for PA271W or 2560 x 1600 for PA301W. If ON is selected, a message will |
|
| appear on the screen after 30 seconds, notifying you that the resolution is not set to |
|
| 1920 x 1080 for PA231W, 1920 x 1200 for PA241W, 2560 x 1440 for PA271W or |
|
| 2560 x 1600 for PA301W. |
|
| Press “LEFT” or “RIGHT” to select. |
|
|
|
| HOT KEY*2 | When this function is activated; the brightness of the monitor can be adjusted without |
|
| entering the OSD menu by using the front buttons. |
|
| The “LEFT” or “RIGHT” buttons adjust the brightness level. |
|
| When this function is set to OFF, some buttons are disabled. See page 9. |
|
|
|
| FACTORY PRESET*2 | Selecting Factory Preset allows you to reset all OSD control settings back to the factory |
|
| settings. Highlighting the control to be reset and pressing the RESET button can reset |
|
| individual settings. |
|
|
|
Tag8 | PIP MODE | Selects PIP MODE, OFF/PIP/PICTURE BY PICTURE - ASPECT/PICTURE BY |
|
| PICTURE - FULL. See page 12. |
|
|
|
| PIP INPUT | Selects the PIP input signal. |
|
|
|
| PIP LEFT/RIGHT | When you select “PIP” in PIP MODE, you can control horizontal position of PIP display |
|
| area. |
|
|
|
*2 This item does not reset by FACTORY PRESET (Tag7).