NEC PA231W, PA301W user manual Figure S.3, English-35

Page 37

6.The procedure will ask for the USB color sensor to be placed on the center of the display panel (Figure S.3). Tilt the display panel approximately 5˚ backward and place the USB color sensor in the center of the display panel (Figure S.1).

NOTE: Place the USB color sensor ﬂ at against the LCD to avoid external light contamination. DO NOT press the calibrator against the display panel.

Press “SELECT” to start the calibration. Stand-alone calibration may take several minutes depending on user settings.

Figure S.3

7.After the CALIBRATION SUCCEEDED message appears (Figure S.4), press SELECT.

8.To end the calibration mode, press “EXIT”.

Figure S.4

English

English-35

Image 37

Contents User’s Manual For PA231W IndexDeclaration of the Manufacturer DeclarationEnglish-1 Declaration of Conformity Canadian Department of Communications Compliance StatementFCC Information English-2Contents Product FeaturesEnglish-4 Quick StartUSB downstream*2 Highest Stand Position English-5English-6 Raise and Lower Monitor ScreenTilt Screen RotationSwivel English-7Remove Monitor Stand for Mounting Flexible Arm InstallationMount Flexible arm English-8English-9 ControlsBrightness/Contrast Controls Auto Adjust Analog input only*1Image Controls Contrast Analog input only*1Fine Analog input only*1 Color Control SystemsAuto Fine Analog input only*1 English-11Edid Extension DVI Input Only ToolsImage Rotation on / SUB Image Rotation on English-12English-13 Menu ToolsInformation ECO InformationOSD Warning English-14Type of Preset Using the Picture Mode functionProgrammable English-15Advanced OSD Way To access the advanced menuTo exit the advanced menu English-16English-17 English-18 English-19 English-20 English-21 English-22 English-23 Recommended use Safety Precautions and MaintenanceEnglish-24 Cleaning the Cabinet Cleaning the LCD PanelErgonomics English-25Monitor Speciﬁcations MultiSync PA231W Speciﬁcations PA231WEnglish-26 Monitor Speciﬁcations MultiSync PA241W Speciﬁcations PA241WEnglish-27 Monitor Speciﬁcations MultiSync PA271W Speciﬁcations PA271WEnglish-28 Monitor Speciﬁcations MultiSync PA301W Speciﬁcations PA301WEnglish-29 English-30 FeaturesTroubleshooting No Video Display image is not sized properlyBrightness variations over time Self DiagnosisEnglish-33 Using the Auto Brightness functionEnglish-34 Self Calibration PA301W onlyEnglish-35 Figure S.3English-36 White Point Matching/Copy PA301W onlyEnglish-37 Figure C.4TCO’03 for MultiSync PA271W/PA301W CongratulationsThis display is designed for both you and the planet TCO Displays 5 for MultiSync PA231W/PA241WEnglish-39 Disposing of your old NEC product Manufacturer’s Recycling and Energy InformationEnergy Saving Weee Mark European Directive 2002/96/EC