Controls
OSD
To access OSD menu, press the MENU button.
To change signal input, press the SELECT button.
NOTE: OSD must be closed in order to change signal input.
8 |
|
7 |
|
Landscape |
|
9 | Portrait |
|
| 1 | 2 | 3 | 4 | 5 | 6 |
|
|
|
|
|
| |
1 | AUTO DIMMING |
|
|
| Detects the level of ambient lighting allowing the monitor to make adjustments to various | |
| SENSOR |
|
|
|
| settings resulting in a more comfortable viewing experience. Do not cover this sensor. |
|
|
|
|
|
|
|
2 | Power |
|
|
|
| Turns the monitor on and off. |
|
|
|
|
|
|
|
3 | LED |
|
|
|
| Indicates that the power is on. |
|
|
|
|
|
| Can be changed between blue and green in the Advanced OSD menu. |
|
|
|
|
|
| |
4 | INPUT/SELECT |
|
|
| Enters the OSD Control menu. Enters OSD sub menus. | |
|
|
|
|
|
| Changes the input source when not in the OSD Control menu. |
|
|
|
|
|
| Hold the button to show USB selection menu when not in the OSD Control menu*1. |
|
|
|
|
|
| NOTE: This USB selection setting back to the current setting by OSD menu when you change |
|
|
|
|
|
| input signal or turn off the monitor. |
|
|
|
|
|
|
|
5 | MENU/EXIT |
|
|
|
| Access OSD menu. Exits the OSD sub menu. Exits OSD Control menu. |
|
|
|
|
|
|
|
6 | LEFT/RIGHT |
|
|
|
| Navigates to the left or right through the OSD Control menu. |
|
|
|
|
|
| You can adjust the brightness directly, while the OSD menu is off*1. |
|
|
|
|
|
|
|
7 | UP/DOWN |
|
|
|
| Navigates up or down through the OSD Control menu. |
|
|
|
|
|
| Show Picture Mode menu when not in the OSD Control menu*1, *2. |
|
|
|
|
|
|
|
8 | RESET/PIP |
|
|
|
| Resets the OSD back to factory settings in the OSD control menu. |
|
|
|
|
|
| PIP can be selected when the OSD is not showing*3. |
|
|
|
|
|
| Hold the button to show ECO Mode menu while the OSD menu is OFF*1. |
|
|
|
|
|
|
|
9 | KEY GUIDE |
|
|
|
| The Key Guide appears on screen when the OSD control menu is accessed. |
|
|
|
|
|
| The Key Guide will rotate when the OSD control menu is rotated*. |
|
|
|
|
|
|
|
*The “LEFT/RIGHT” and “UP/DOWN” buttons functionality is interchangeable depending on the orientation (Landscape/Portrait) of the OSD.
*1 When HotKey function is OFF, this function is disabled.
*2 PICTURE MODE menu.
Press the UP/DOWN button to select PICTURE MODE. In PIP or PICTURE BY PICTURE mode, picture mode can be selected for main and sub window independently by pressing Left/Right button.
*3 PIP mode menu.
Press the UP/DOWN button to select
SETTING OSD LANGUAGE
•Use the control keys (LEFT/RIGHT or UP/DOWN or MENU) to access the “LANGUAGE SELECTION” menu.
•Press the LEFT/RIGHT or UP/DOWN buttons to select the desired OSD language.
•To exit from this OSD menu, press EXIT button.
NOTE: Setting the OSD language is only necessary upon initial setup. The OSD language will stay the same until changed by the user.