NEC PA241W, PA271W user manual English-21

OSD LOCK OUT*2

This control completely locks out access to all OSD control functions. When attempting

to activate OSD controls while in the Lock Out mode, a screen will appear indicating the

OSD controls are locked out.

There are three types of OSD LOCK OUT:

OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT,

then “Right” button and hold down simultaneously. To deactivate the OSD Lock Out,

press SELECT, then “Right” button and hold down simultaneously while in the OSD

menu. No controls can be adjusted while in the lock out mode.

OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock Out

function, press SELECT, then “Down” and “Left” buttons and hold down simultaneously.

To deactivate the OSD Lock Out, press SELECT, then “Down” and “Left” buttons and

hold down simultaneously while in the OSD menu. BRIGHTNESS can be adjusted while

in the lock out mode.

CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or

DISABLE for POWER KEY, INPUT SEL, HOT KEY (BRIGHTNESS), PICTURE MODE,

WARNING (RESOLUTION NOTIFIER/OSD LOCK OUT). To Deactivate the OSD Lock

Out function, press RESET and EXIT to bring up the LOCK OUT warning.

Press SELECT, SELECT, <, >, <, >, EXIT.

OSD TRANSPARENCY

Adjusts the transparency of the OSD MENU.

OSD COLOR*2

“Tag window frame color”, “Item select color” & ”Adjust Window frame color” can be

changed.

BOOT LOGO*2

The NEC logo is briefl y displayed after the monitor is powered on. This feature can be

turned on or off in the OSD.

Note: If the “EXIT” button is kept pressed while NEC logo is displayed, the BOOT LOGO

menu will appear. It is possible to change the BOOT LOGO setting to OFF.

SIGNAL

Signal information can be displayed in the corner of the screen.

INFORMATION*2

Signal information is either “On/Off”.

RESOLUTION

The optimal resolution is 1920 x 1200 for PA241W or 2560 x 1440 for PA271W. If ON is

NOTIFIER*2

selected, a message will appear on the screen after 30 seconds, notifying you that the

resolution is not set to 1920 x 1200 for PA241W or 2560 x 1440 for PA271W.

Press “Left” or “Right” to select.

HOT KEY*2

When this function is activated; the brightness of the monitor can be adjusted without

entering the OSD menu by using the front buttons.

The “Left” or “Right” buttons adjust the brightness level.

When this function is set to OFF, some buttons are disabled. See page 9.

FACTORY PRESET*2

Selecting Factory Preset allows you to reset all OSD control settings back to the factory

settings. Highlighting the control to be reset and pressing the RESET button can reset

individual settings.

Tag8

PIP MODE

Selects PIP MODE, OFF/PIP/PICTURE BY PICTURE - ASPECT/PICTURE BY

PICTURE - FULL. See page 12.

PIP INPUT

Selects the PIP input signal.

PIP LEFT/RIGHT

When you select “PIP” in PIP MODE, you can control horizontal position of PIP display

area.

PIP DOWN/UP

When you select “PIP” in PIP MODE, you can control vertical position of PIP display area.

PIP SIZE

Selects the size of the sub-picture used in PIP mode.

BLANK SIGNAL SKIP

Skip no signal inputs when you change input signal with INPUT button.

OSD ROTATION

AUTO: The OSD rotates automatically when the monitor is rotated. OSD ROTATION is

set to AUTO by default.

LANDSCAPE: Display the OSD with landscape mode.

PORTRAIT: Display the OSD with portrait mode.

IMAGE ROTATION

AUTO: The display image automatically rotates according to the orientation of the

display. If “AUTO” is selected in the “OSD ROTATION” menu, the display image rotates

according to the orientation of the monitor.

OFF: The display image is not rotated. IMAGE ROTATION is set to OFF by default.

ON: The display image always rotated.

Note: For PA271W, this function is effective only if PICTURE BY PICTURE-ASPECT or

PICTURE BY PICTURE-FULL.