NEC A3842, IB-AUDIO, IntelliBase Safety Precautions and Maintenance, FCC Wants You to Know

Page 3

NEC-ADA201 Eng/Fr. manual 9/8/98 12:25 PM Page 3

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING

WHEN SETTING UP AND USING THE MULTISYNC INTELLIBASE AUDIO:

Read Instructions — All the safety and operating instructions should be read before the appliance is operated. Retain Instructions — The operating instructions should be retained for future reference.

Heed Warning — All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions — All operating and use instructions should be followed.

Water and Moisture — The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

Outdoor Use — Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Location — The appliance should be installed in a stable location. Do not use the monitor while the base is removed. Ventilation — The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat — The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

Power Sources — Use the supplied AC adapter. The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Do not use the supplied AC adapter with any other devices. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Image and Sound — Adjust the sound output for optimal image and speaker clarity.

Grounding or Polarization — Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

Cleaning — The appliance should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet.

Non-Use Periods — The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

Damage Requiring Service — The appliance should be serviced by qualified service personnel when:

The power-supply cord or the plug has been damaged.

Objects have fallen, or liquid has been spilled into the appliance.

The appliance has been exposed to rain.

The appliance does not appear to operate normally or exhibits a marked change in performance.

The appliance has been dropped or the enclosure damaged.

Servicing — The user should not attempt to service the appliance. Servicing should be referred to qualified service personnel or returned to the dealer or call the NEC TECH service line for assistance at 1-800-632-4662.

The FCC Wants You to Know

1.Use the attached specified cable with the MultiSync IntelliBase so as not to interfere with radio and television reception. Please use the supplied power cable or equivalent to ensure FCC compliance.

2.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and receiver.

c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4

Image 3
Contents MultiSync IntelliBase Audio Table des matières IndexFCC Wants You to Know Safety Precautions and MaintenanceContents MultiSync Monitor Model Names Original Monitor Base Quick StartMultiSync Monitor Model Names Adapter Plate a Spindle Base Locking Tabs Using a Phillips Aligns with Original Mounting NEC-ADA201 Eng/Fr. manual 9/8/98 1226 PM Locate the two Screws that are Supplied with IntelliBase Detail a Controls Specifications Environmental ConsiderationsSystem Hardware Requirements Audio cable that is TroubleshootingDeclaration of the Manufacturer ReferencesLimited Warranty NEC-ADA201 Eng/Fr. manual 9/8/98 1227 PM Consignes de sécurité et entretien Vis ContenuNoms des modèles de moniteurs Démarrage rapideNoms des modèles de moniteurs MultiSync La C Étape 2, comme illustré à la BÉtape Montage D’ORIGINE Nouveau Montage La E Étape 6 Repérer les Deux vis qui Sont fournies Avec’IntelliBase Et fixerNEC-ADA201 Eng/Fr. manual 9/8/98 1228 PM NEC-ADA201 Eng/Fr. manual 9/8/98 1228 PM Étape 8 Repérer les Deux vis qui Sont fournies Avec VUE Arriere Commandes Caractéristiques EnvironnementExigences en matériel Informatique Câble audio qui va à DépannageDéclaration du fabricant RéférencesGarantie limitée NEC-ADA201 Eng/Fr. manual 9/8/98 1228 PM Avis DE Propriété Exclusive ET Dénégation DE Responsabilité Proprietary Notice and Liability Disclaimer