Quick Start
How to attach IntelliBase™ Audio to your MultiSync® brand monitor
MAKE SURE THE MONITOR IS DISCONNECTED FROM THE SYSTEM AND IS UNPLUGGED FROM THE WALL OUTLET BEFORE ANY WORK IS DONE ON THE MONITOR.
FOR
To attach the IntelliBase to your MultiSync brand monitor, the original base must first be removed. Depending on the model of your MultiSync brand monitor, the removal procedure of the original base and the attachment of the IntelliBase will vary. Locate the model name (located in the lower right corner of your monitor’s bezel) of your MultiSync brand monitor in the table below. Follow the removal procedure to detach the original base from your monitor using the diagrams on the following pages and attach the IntelliBase to your monitor.
MultiSync Monitor Model Names | Original Monitor Base |
Removal and IntelliBase | |
| Installation Instructions |
MultiSync 50, MultiSync 70, XV15 and | Page 3 |
XV15+ |
|
|
|
MultiSync 90, XE15, XE17, XP15, XP17, |
|
XV17, XV17+, A500, A500+, A700, | Page 5 |
A700+, A900, E500, E700, E900, E900+, |
|
M500, M700 and P750 |
|
|
|
MultiSync XE21, XP21, E1100, E1100+, | Page 7 |
P1150 and P1250+ |
|
|
|
2