Step 3 Locate Adapter Plate “A” that is supplied with the IntelliBase and secure it to the spindle using the screw that was removed in Step 2
as shown in Figure 2B.
Step 4 Locate the two screws that are supplied with the IntelliBase and attach the IntelliBase to the adapter plate and monitor
as shown
in Figure 2C.
Figure 2B
ADAPTER
PLATE (A)
SPINDLE
ROTATE ADAPTER PLATE UNTIL IT ALIGNS WITH THROUGH HOLES ON THE BASE
GUIDE SPINDLE THROUGH CENTER HOLE ON ADAPTER PLATE (A)
Figure 2C
INTELLIBASE (BOTTOM VIEW)
Proceed to Page 10 to connect your MultiSync monitor with IntelliBase Audio to your system.
4