NEC FE991SB user manual Monitor MultiSync FE791SB Specifications

Specifications

Monitor		MultiSync FE791SB	Notes
Specifications		Monitor
Picture Tube	Diagonal:	43 cm/17 inch	90° deflection, 0.25 mm grille pitch,
Viewable Image Size: 406 mm/16 inch			medium short persistence phosphor,
			aperture grille CRT, multi-layered, anti-
			static screen coating, dark-tint screen
			and OptiClear screen.
Input Signal	Video:	ANALOG 0.7 Vp-p/75 Ohms
	Sync: Separate sync. TTL Level
		Horizontal sync. Positive/Negative
		Vertical sync. Positive/Negative
		Composite sync. (Positive/Negative) (TTL Level)
Display Colours	Analog input:	Unlimited number of Colours	Depends on display card used.
Synchronization	Horizontal:	30 kHz to 96 kHz	Automatically
Range	Vertical:	50 Hz to 160 Hz	Automatically
Resolutions Supported		640 x 480 @ 60 to 160 Hz	Some systems may not support all
Resolution based on horizontal and		800 x 600 @ 50 to 146 Hz	modes listed.
vertical frequencies only		832 x 624 @ 50 to 141 Hz
		1024 x 768 @ 50 to 116 Hz...............NEC-Mitsubishi Electronics Display
		1152 x 870 @ 50 to 103 Hz	cites recommended resolution at
		1280 x 1024 @ 50 to 89 Hz	85 Hz for optimal display performance
		1600 x 1200 @ 50 to 76 Hz
Active Display Area	Horizontal:	315 mm/12.4 inches	Dependent upon signal timing used,
(Factory Setting)	Vertical:	236 mm/9.3 inches	and does not include
			border area.
Active Display Area		325 mm/12.8 inches	Dependent upon signal timing used,
(Full Scan)		244 mm/9.6 inches	and does not include
			border area.
Power Supply		AC 100 - 240 V, 50 - 60 Hz
Current Rating		1.9 A @ 100 - 240 V
Dimensions		397 mm (W) x 392 mm (H) x 415.5 mm (D)
		15.6 inches (W) x 15.4 inches (H) x 16.4 inches (D)
Weight		17.2 kg
		37.9 lbs
Environmental Considerations
Operating Temperature:		+5 °C to +35 °C
	Humidity:	10 % to 90 %
	Altitude:	0 to 3,000 m
Storage Temperature:		-20 °C to +60 °C
	Humidity:	10 % to 90 %
	Altitude:	0 to 15,000 m

NOTE: Technical specifications are subject to change without notice.

12User’s Manual

1-36