Load up to
10 envelopes
25 sheets of labels
10 transparencies
Make sure
•The stamp location is in the upper left corner.
•The print side of the envelopes faces you.
•The envelopes are designed for use with inkjet printers.
•The envelopes are loaded against the right side of the paper support.
•The paper guide rests against the left edge of the envelopes.
Warning: Do not use envelopes that have metal clasps, string ties, or metal folding bars.
Notes:
–Do not load envelopes with holes, perforations, cutouts, or deep embossing.
–Do not use envelopes that have exposed flap adhesive.
•You follow the loading instructions that came with the labels.
•The print side of the labels faces you.
•The adhesive on the labels does not extend to within 1 mm of the edge of the label.
•You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam.
•The labels are loaded against the right side of the paper support.
•The paper guide rests against the left edge of the labels.
•The rough side of the transparencies faces you.
•You don't use transparencies with paper backing sheets.
•The transparencies are loaded against the right side of the paper support.
•The paper guide rests against the left edge of the transparencies.
Note: Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging.
21