Kensington MT1075, MT1065 user manual Making Connections, When Viewing a DVI Digital Signal

Page 14

Making Connections

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

*If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.

*If you accidentally hit the POWER button on the remote control, wait 90 seconds and then press the POWER button again to resume.

When Viewing a DVI Digital Signal:

To project a DVI digital signal, be sure to connect the PC and the projector using a DVI-D signal cable (not supplied) before turning on your PC or projector. Turn on the projector first and select DVI (DIGITAL) from the source menu before turning on your PC.

Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC. Do not disconnect the DVI-D signal cable while the projector is running. If the signal cable has been disconnected and then re-connected, an image may not be correctly displayed. Should this happen, restart your PC.

NOTE:

Use the DVI-D cable compliant with DDWG (Digital Display Working Group) DVI (Digital Visual Interface) revision 1.0 standard. The DVI-D cable should be within 5 m (196") long.

The DVI (DIGITAL) connector accepts VGA (640x480), SVGA (800x600), 1152x864, XGA (1024x768) and SXGA (1280x1024 @ up to 60Hz).

Connecting Your PC or Macintosh Computer

DVI IN

RGB 2 IN

RGB 1IN

RGB signal cable (supplied) To mini D-Sub 15-pin connec-

tor on the projector. It is recom- mended that you use a com- mercially available distribution amplifier if connecting a signal cable longer than the supplied one.

PHONE

IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type)

Connecting your PC or Macintosh computer to your projector will en- able you to project your computer's screen image for an impressive pre- sentation.

To connect to a PC or Macintosh, simply:

1.Turn off the power to your projector and computer.

2.Use the supplied signal cable to connect your PC or Macintosh to the projector.

3.Turn on the projector and the computer.

4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you've connected to the projector.

DVI-D cable (not supplied)

Audio cable (not supplied)

IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type)

PHONE

NOTE: For older Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac's video port.

Connecting to RGB 2 IN connectors

Use a BNC×5 cable to connect your PC and the RGB 2 IN connectors on your projector.

Connecting Your PC with a DVI Connector

Use a DVI-D signal cable (not supplied) to connect a DVI connector of your PC to the projector.

NOTE: The MT1075/MT1065 is not compatible with video decoded outputs of NEC ISS-6020 and ISS-6010.

E-14

Image 14
Contents MT1075/MT1065 Safety Cautions Whats in the Box? Fire and Shock PrecautionsLamp Replacement For North America only MT1065 onlyTable of Contents Introduction to the Projector Features youll enjoyIntroduction Carrying the Projector Part Names of the ProjectorAttaching the lens cap Top Features SelectTerminal Panel Features Part Names of the Remote Control On the screen using the SelectSelect Operating Range for Wireless Remote Control Battery InstallationRemote Control Precautions Using the Remote Control in Wired OperationSelecting a Location Installation and ConnectionsSetting Up the Screen and the Projector Throw Distance and Screen Size Distance ChartDo not attempt to install the projector yourself Reflecting the ImageConnecting to RGB 2 in connectors When Viewing a DVI Digital SignalConnecting Your PC or Macintosh Computer Connecting Your PC with a DVI ConnectorConnecting an External Monitor To connect Scart output RGBConnecting Your DVD Player DVD playerConnecting Your VCR or Laser Disc Player Connecting the Supplied Power CableProjecting AN Image Basic Operation Turning on the ProjectorAdjust the Tilt Foot Adjusting the Picture Size and PositionUsing the Remote Control Selecting a SourceFocus When using the remote control or cabinet buttonsUsing Auto Focus Use the Focus Button +/- to obtain the best focusWhen using the USB connected to the projector Confirmation screen is displayedAdjusting the Image Using Auto Adjust Turning Up or Down VolumeUsing the Laser Pointer Optimizing RGB Picture AutomaticallyTo turn off the projector Setting the function switchTurning off the Projector Convenient Features Using the Remote Mouse FunctionExecuting the Auto 3D Reform feature Auto 3D ReformSetting Screen of Auto 3D Reform AdjustmentGetting the On-line Help Using the PointerFreezing a Picture Using the middle button on the mouse Using a USB Mouse Using the USB HUB FunctionOperate the Menus using the USB mouse USB Memory Device or USB Memory Card Reader Support Changing Background LogoMaking Freehand Drawings on a Projected Image ChalkBoard Using the Viewer Making the Most out of the Viewer FunctionProjecting slides Viewer When the tool bar is not displayedOperating the Viewer Function from the Projector playback Viewing Digital Images Auto Play ModeSwitching to Slides Directly from Other Input Modes PreparationsTo delete captured images Using the PC Card Files Fucntion PC Card FilesDeleting Captured Images Default Custom Menu items are Using ON-SCREEN MenuUsing the Menus Basic Menu OperationMenu tree Advanced MenuCommunication Speed Operation Mode SelectDefault Source Select WEP Menu Elements Source Select Entering Alphanumeric Characters by Using the MenuMenu Descriptions & Functions Sound Entry Edit CommandPicture not available for Viewer and LAN Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup User can adjust the image display functions Hori Resolution manuallySelecting Lamp Mode and Lamp Type Lamp Setting Selecting Aspect Ratio and Position for Screen Screen Selecting Auto FunctionsSetting LAN Mode Network Type required for wireless onlyUses 64-bit datalength for secure transmission WEP for Wireless onlyNications may be monitored by someone Pared to use of 64bit datalength encryptionEntry Setting a PasswordStatus DeleteTo delete PC card data you registered To enable Security, use the SelectSecurity Help Returning to Factory DefaultTools To replace the lamp MaintenanceReplacing the Lamp Cleaning the Cabinet and the Lens CleaningCleaning or Replacing the Filter Vacuum the filter-through the filter coverStatus Indicator TroubleshootingPower Indicator Lamp IndicatorFor more information contact your dealer Common Problems & Solutions Check These ItemsImage isn’t square to Page Specifications Model Number MT1075 OpticalModel Number MT1065 Optical Mini D-Sub 15 Pin Connector Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List PC Control Codes and Cable Connection PC Control Connector D-SUB 9PUsing Software Keyboard Cable ConnectionPreparation Before Use Operation Using an Http BrowserOverview Handling of the Address for Operation via a BrowserTerm of warranty TravelCare a service for international travelersServices offered with TravelCare TravelCare GuideAsia and Middle East Kuala Lumpur, MalaysiaApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1065, MT1075 specifications

Kensington, a leader in innovative accessories for the digital workspace, has introduced two remarkable models: the MT1065 and MT1075. These devices are designed to enhance productivity and provide seamless connectivity in the modern office environment.

The Kensington MT1065 is specially engineered for professionals seeking a reliable and feature-rich solution for their connectivity needs. One of its main highlights is its versatility, as it supports multiple connections, including HDMI, USB-C, and VGA. This flexibility allows users to easily connect various devices, from laptops to projectors, and seamlessly transition between presentations or collaborative sessions.

With its compact and lightweight design, the MT1065 is ideal for on-the-go professionals. It fits easily into a backpack or laptop case, making it convenient for travel. Additionally, this model employs advanced video technology, supporting resolutions up to 4K, ensuring that presentations are crisp, clear, and visually engaging. The MT1065 also features Plug and Play capability, which means that users can set it up quickly without the need for additional software or drivers.

On the other hand, the Kensington MT1075 takes connectivity a step further by incorporating additional ports, including multiple USB-A and USB-C connections. This makes it a perfect choice for those who require extended connectivity options. It facilitates connection to numerous peripherals, such as external hard drives, keyboards, and mice, all while keeping the workspace organized and efficient.

The MT1075 also boasts advanced power delivery capabilities, enabling the user to charge their devices while maintaining high-performance data transfer simultaneously. This dual functionality helps in minimizing cable clutter, resulting in a cleaner and more organized workstation. Furthermore, it supports high-definition video output, making it suitable for video conferencing, online streaming, and graphic-intensive applications.

Both models feature a robust build quality, ensuring durability and longevity, vital in a bustling office environment. Kensington’s commitment to user-friendly design is evident in the easy-to-use interface and ergonomic layout, prompting users to maximize their productivity effectively.

In conclusion, whether opting for the Kensington MT1065 or the MT1075, users benefit from advanced connectivity options, enhanced power delivery, and a commitment to quality and performance. Both models encapsulate the essence of modern workspace needs, allowing professionals to work smarter and more efficiently in today’s digital age.