Kensington MT1075, MT1065 Optimizing RGB Picture Automatically, Turning Up or Down Volume

Page 22

NOTE: During 3D Reform adjustment, "Aspect Ratio" and "Screen" may not be available. Should this happen, first reset the 3D Reform data and then do each setting. Second repeat the 3D Reform adjustment. Changing Aspect Ratio and/ or Screen setting can limit 3D Reform in its adjustable range.

The adjustable ranges for 3D Reform are as follows:

Horizontal

Max ±35° approx.

Vertical

Max +50°/-25° approx.

*The following are conditions at the above maximum angle when all of the following are met

Image is projected in Wide (Zoom)

Resolution is XGA

Higher resolution than XGA limits 3D Reform in its adjustable range.

Menu items should be set as follows:

Aspect Ratio

4:3

Screen Type

4:3

Horizontal and Vertical are adjusted separately.

A combination of both adjustments limits 3D Reform in its adjustable range.

When "4:3 Fill" is selected in Aspect Ratio, "Cornerstone" and "Hori- zontal Keystone" are not available.

Optimizing RGB Picture Automatically

Adjusting the Image Using Auto Adjust

Optimizing RGB image automatically

Press the Auto Adjust button to optimize an RGB image automatically.

[Poor picture]

AUTO ADJ.

[Normal picture]

Turning Up or Down Volume

Sound level from the speaker and the AUDIO OUT jack (RCA) on the projector can be adjusted.

VOLUME

increase volume

decrease volume

Volume bar

Using the Laser Pointer

You can use the laser to draw your audience's attention to a red dot that you can place on any object.

Press and hold the LASER button to activate the laser pointer.

Press the Auto Adjust button to fine-tune the computer image or to re- move any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmering). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmer- ing.)

This adjustment may be necessary when you connect your computer for the first time.

NOTE:

Some signals may not be displayed correctly or take time.

The Auto Adjust function does not work for component and video signal.

If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock and Phase manually. See page E-41.

Pressing and holding the AUTO ADJUST button on the cabinet or AUTO ADJ button on the remote control for a minimum of 2 seconds will enable the Auto Focus and the Auto Wall Color Correction feature instead of the Auto Adjust feature.

CAUTION:

Do not look into the laser pointer while it is on.

Do not point the laser beam at a person.

E-22

Image 22
Contents MT1075/MT1065 Safety Cautions Whats in the Box? Fire and Shock PrecautionsLamp Replacement For North America only MT1065 onlyTable of Contents Introduction Features youll enjoyIntroduction to the Projector Attaching the lens cap Part Names of the ProjectorCarrying the Projector Top Features SelectTerminal Panel Features Part Names of the Remote Control On the screen using the SelectSelect Operating Range for Wireless Remote Control Battery InstallationRemote Control Precautions Using the Remote Control in Wired OperationSetting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Throw Distance and Screen Size Distance ChartDo not attempt to install the projector yourself Reflecting the ImageConnecting to RGB 2 in connectors When Viewing a DVI Digital SignalConnecting Your PC or Macintosh Computer Connecting Your PC with a DVI ConnectorConnecting an External Monitor To connect Scart output RGBConnecting Your DVD Player DVD playerConnecting Your VCR or Laser Disc Player Connecting the Supplied Power CableProjecting AN Image Basic Operation Turning on the ProjectorAdjust the Tilt Foot Adjusting the Picture Size and PositionUsing the Remote Control Selecting a SourceFocus When using the remote control or cabinet buttonsUsing Auto Focus Use the Focus Button +/- to obtain the best focusWhen using the USB connected to the projector Confirmation screen is displayedAdjusting the Image Using Auto Adjust Turning Up or Down VolumeUsing the Laser Pointer Optimizing RGB Picture AutomaticallyTurning off the Projector Setting the function switchTo turn off the projector Convenient Features Using the Remote Mouse FunctionExecuting the Auto 3D Reform feature Auto 3D ReformSetting Screen of Auto 3D Reform AdjustmentFreezing a Picture Using the PointerGetting the On-line Help Operate the Menus using the USB mouse Using a USB Mouse Using the USB HUB FunctionUsing the middle button on the mouse Making Freehand Drawings on a Projected Image ChalkBoard Changing Background LogoUSB Memory Device or USB Memory Card Reader Support Using the Viewer Making the Most out of the Viewer FunctionOperating the Viewer Function from the Projector playback When the tool bar is not displayedProjecting slides Viewer Viewing Digital Images Auto Play ModeSwitching to Slides Directly from Other Input Modes PreparationsDeleting Captured Images Using the PC Card Files Fucntion PC Card FilesTo delete captured images Default Custom Menu items are Using ON-SCREEN MenuUsing the Menus Basic Menu OperationMenu tree Advanced MenuDefault Source Select Operation Mode SelectCommunication Speed WEP Menu Elements Menu Descriptions & Functions Entering Alphanumeric Characters by Using the MenuSource Select Sound Entry Edit CommandPicture not available for Viewer and LAN Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup User can adjust the image display functions Hori Resolution manuallySelecting Lamp Mode and Lamp Type Lamp Setting Selecting Aspect Ratio and Position for Screen Screen Selecting Auto FunctionsSetting LAN Mode Network Type required for wireless onlyUses 64-bit datalength for secure transmission WEP for Wireless onlyNications may be monitored by someone Pared to use of 64bit datalength encryptionEntry Setting a PasswordStatus DeleteSecurity To enable Security, use the SelectTo delete PC card data you registered Tools Returning to Factory DefaultHelp Replacing the Lamp MaintenanceTo replace the lamp Cleaning the Cabinet and the Lens CleaningCleaning or Replacing the Filter Vacuum the filter-through the filter coverStatus Indicator TroubleshootingPower Indicator Lamp IndicatorImage isn’t square to Common Problems & Solutions Check These ItemsFor more information contact your dealer Page Specifications Model Number MT1075 OpticalModel Number MT1065 Optical Mini D-Sub 15 Pin Connector Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List PC Control Codes and Cable Connection PC Control Connector D-SUB 9PUsing Software Keyboard Cable ConnectionPreparation Before Use Operation Using an Http BrowserOverview Handling of the Address for Operation via a BrowserTerm of warranty TravelCare a service for international travelersServices offered with TravelCare TravelCare GuideAsia and Middle East Kuala Lumpur, MalaysiaApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1065, MT1075 specifications

Kensington, a leader in innovative accessories for the digital workspace, has introduced two remarkable models: the MT1065 and MT1075. These devices are designed to enhance productivity and provide seamless connectivity in the modern office environment.

The Kensington MT1065 is specially engineered for professionals seeking a reliable and feature-rich solution for their connectivity needs. One of its main highlights is its versatility, as it supports multiple connections, including HDMI, USB-C, and VGA. This flexibility allows users to easily connect various devices, from laptops to projectors, and seamlessly transition between presentations or collaborative sessions.

With its compact and lightweight design, the MT1065 is ideal for on-the-go professionals. It fits easily into a backpack or laptop case, making it convenient for travel. Additionally, this model employs advanced video technology, supporting resolutions up to 4K, ensuring that presentations are crisp, clear, and visually engaging. The MT1065 also features Plug and Play capability, which means that users can set it up quickly without the need for additional software or drivers.

On the other hand, the Kensington MT1075 takes connectivity a step further by incorporating additional ports, including multiple USB-A and USB-C connections. This makes it a perfect choice for those who require extended connectivity options. It facilitates connection to numerous peripherals, such as external hard drives, keyboards, and mice, all while keeping the workspace organized and efficient.

The MT1075 also boasts advanced power delivery capabilities, enabling the user to charge their devices while maintaining high-performance data transfer simultaneously. This dual functionality helps in minimizing cable clutter, resulting in a cleaner and more organized workstation. Furthermore, it supports high-definition video output, making it suitable for video conferencing, online streaming, and graphic-intensive applications.

Both models feature a robust build quality, ensuring durability and longevity, vital in a bustling office environment. Kensington’s commitment to user-friendly design is evident in the easy-to-use interface and ergonomic layout, prompting users to maximize their productivity effectively.

In conclusion, whether opting for the Kensington MT1065 or the MT1075, users benefit from advanced connectivity options, enhanced power delivery, and a commitment to quality and performance. Both models encapsulate the essence of modern workspace needs, allowing professionals to work smarter and more efficiently in today’s digital age.