Kensington MT1065 Confirmation screen is displayed, When using the USB connected to the projector

Page 21

7. Press the ENTER button.

Screen

8. Use the SELECT

button to select another icon which points

in the direction.

 

3.Press the 3D REFORM button on the remote control. The Cornerstone adjustment screen is displayed.

The Cornerstone adjustment screen will disappear when you move the USB mouse cursor.

4.Point to one of the remaining 3 corners and left-click on it.

Left-click on the corner.

Screen

Screen

On the Cornerstone adjustment screen, select “Exit” and then “OK”, or press the CANCEL but- ton on the remote control.

The confirmation screen is displayed.

9. Press the SELECT or button to highlight the [OK] and press the ENTER button.

This completes the keystone correction.

Selecting “Cancel” will return to the adjustment screen without saving changes (Step 3).

Selecting "Reset" will return to the factory default. Selecting "Undo" will exit without saving changes.

When using the USB connected to the projector

Preparation: Connect the USB mouse to the projector. See page E-28.

1.Project an image so that the screen is smaller than the area of the raster.

2.Pick up any one of the corners and align the corner of the screen with the one of the image. (The drawing shows the upper right cor- ner.)

Projected image

Screen

5.Do the above step 4 for the other two corners so that the projected area becomes smaller than the screen.

Screen

Left-click on each corner.

6.To complete the procedure, right-click anywhere on the screen. The confirmation screen is displayed.

7.Left-click on "OK".

This completes the Cornerstone adjustment.

*To return the Cornerstone adjustment to the default settings, left- click on "Reset" in Step 7.

You can save your Cornerstone changes. The changes are saved when you turn off the projector. To do so, select [Projector Options] → [Setup]

→[Page 4]. Select the 3D Reform Save check box. This is not selected at the time of shipment.

*There are limitations of shapes which can be corrected using the Cor- nerstone adjustment.

When adjusting the Cornerstone beyond these limits, you will get the message "Out of adjustment range!" and no correction can be done. Should this happen, do the Cornerstone adjustment again within the allowable range.

*Due to limitations of accuracy within internal processes, there may be some discrepancy of positions between the mouse cursor and corrected shape or one corner and the other 3 corners.

NOTE: To return the 3D Reform correction setting values to the factory default, press and hold the 3D REFORM button for a minimum of 2 seconds.

E-21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MT1075/MT1065 Safety Cautions Lamp Replacement Fire and Shock PrecautionsWhats in the Box? For North America only MT1065 onlyTable of Contents Features youll enjoy IntroductionIntroduction to the Projector Part Names of the Projector Attaching the lens capCarrying the Projector Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlSelect Remote Control Precautions Battery InstallationOperating Range for Wireless Remote Control Using the Remote Control in Wired OperationInstallation and Connections Setting Up the Screen and the ProjectorSelecting a Location Do not attempt to install the projector yourself Distance ChartThrow Distance and Screen Size Reflecting the ImageConnecting Your PC or Macintosh Computer When Viewing a DVI Digital SignalConnecting to RGB 2 in connectors Connecting Your PC with a DVI ConnectorTo connect Scart output RGB Connecting an External MonitorDVD player Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationUsing the Remote Control Adjusting the Picture Size and PositionAdjust the Tilt Foot Selecting a SourceUsing Auto Focus When using the remote control or cabinet buttonsFocus Use the Focus Button +/- to obtain the best focusConfirmation screen is displayed When using the USB connected to the projectorUsing the Laser Pointer Turning Up or Down VolumeAdjusting the Image Using Auto Adjust Optimizing RGB Picture AutomaticallySetting the function switch Turning off the ProjectorTo turn off the projector Using the Remote Mouse Function Convenient FeaturesAuto 3D Reform Executing the Auto 3D Reform featureAdjustment Setting Screen of Auto 3D ReformUsing the Pointer Freezing a PictureGetting the On-line Help Using a USB Mouse Using the USB HUB Function Operate the Menus using the USB mouseUsing the middle button on the mouse Changing Background Logo Making Freehand Drawings on a Projected Image ChalkBoardUSB Memory Device or USB Memory Card Reader Support Making the Most out of the Viewer Function Using the ViewerWhen the tool bar is not displayed Operating the Viewer Function from the Projector playbackProjecting slides Viewer Switching to Slides Directly from Other Input Modes Auto Play ModeViewing Digital Images PreparationsUsing the PC Card Files Fucntion PC Card Files Deleting Captured ImagesTo delete captured images Using the Menus Using ON-SCREEN MenuDefault Custom Menu items are Basic Menu OperationAdvanced Menu Menu treeOperation Mode Select Default Source SelectCommunication Speed WEP Menu Elements Entering Alphanumeric Characters by Using the Menu Menu Descriptions & FunctionsSource Select Picture not available for Viewer and LAN Entry Edit CommandSound Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup Resolution manually User can adjust the image display functions HoriSelecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModeNications may be monitored by someone WEP for Wireless onlyUses 64-bit datalength for secure transmission Pared to use of 64bit datalength encryptionStatus Setting a PasswordEntry DeleteTo enable Security, use the Select SecurityTo delete PC card data you registered Returning to Factory Default ToolsHelp Maintenance Replacing the LampTo replace the lamp Cleaning or Replacing the Filter CleaningCleaning the Cabinet and the Lens Vacuum the filter-through the filter coverPower Indicator TroubleshootingStatus Indicator Lamp IndicatorCommon Problems & Solutions Check These Items Image isn’t square toFor more information contact your dealer Page Model Number MT1075 Optical SpecificationsModel Number MT1065 Optical Pin Assignments of D-Sub RGB Input Connector Cabinet DimensionsMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List Using Software Keyboard PC Control Connector D-SUB 9PPC Control Codes and Cable Connection Cable ConnectionOverview Operation Using an Http BrowserPreparation Before Use Handling of the Address for Operation via a BrowserServices offered with TravelCare TravelCare a service for international travelersTerm of warranty TravelCare GuideKuala Lumpur, Malaysia Asia and Middle EastApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1065, MT1075 specifications

Kensington, a leader in innovative accessories for the digital workspace, has introduced two remarkable models: the MT1065 and MT1075. These devices are designed to enhance productivity and provide seamless connectivity in the modern office environment.

The Kensington MT1065 is specially engineered for professionals seeking a reliable and feature-rich solution for their connectivity needs. One of its main highlights is its versatility, as it supports multiple connections, including HDMI, USB-C, and VGA. This flexibility allows users to easily connect various devices, from laptops to projectors, and seamlessly transition between presentations or collaborative sessions.

With its compact and lightweight design, the MT1065 is ideal for on-the-go professionals. It fits easily into a backpack or laptop case, making it convenient for travel. Additionally, this model employs advanced video technology, supporting resolutions up to 4K, ensuring that presentations are crisp, clear, and visually engaging. The MT1065 also features Plug and Play capability, which means that users can set it up quickly without the need for additional software or drivers.

On the other hand, the Kensington MT1075 takes connectivity a step further by incorporating additional ports, including multiple USB-A and USB-C connections. This makes it a perfect choice for those who require extended connectivity options. It facilitates connection to numerous peripherals, such as external hard drives, keyboards, and mice, all while keeping the workspace organized and efficient.

The MT1075 also boasts advanced power delivery capabilities, enabling the user to charge their devices while maintaining high-performance data transfer simultaneously. This dual functionality helps in minimizing cable clutter, resulting in a cleaner and more organized workstation. Furthermore, it supports high-definition video output, making it suitable for video conferencing, online streaming, and graphic-intensive applications.

Both models feature a robust build quality, ensuring durability and longevity, vital in a bustling office environment. Kensington’s commitment to user-friendly design is evident in the easy-to-use interface and ergonomic layout, prompting users to maximize their productivity effectively.

In conclusion, whether opting for the Kensington MT1065 or the MT1075, users benefit from advanced connectivity options, enhanced power delivery, and a commitment to quality and performance. Both models encapsulate the essence of modern workspace needs, allowing professionals to work smarter and more efficiently in today’s digital age.
Top Page Image Contents