Kensington MT1075, MT1065 user manual Connecting Your DVD Player, DVD player

Page 16

Connecting Your DVD Player

Optional 15-pin-to-RCA (female)×3 cable (ADP-CV1)

RGB2IN

RGB 1 IN

RCA(female)-to-BNC(male) adapter (not supplied)

Component video RCA×3 cable (not supplied)

DVD player

AUDIO OUT

Component

L

R

Y

Cb

Cr

Audio Equipment

AUDIO IN

L R

Audio cable (not supplied)

You can connect your projector to a DVD player with component output or Video output. To do so, simply:

1.Turn off the power to your projector and DVD player.

2.If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCAX3) and the op- tional 15-pin-to-RCA (female)×3 cable to connect your DVD player to the RGB IN1 or IN2 connector on the projector.

For a DVD player without component video (Y,Cb,Cr) output, use com- mon RCA cables (not provided) to connect a composite VIDEO out- put of the DVD player to the Video Input of the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements,

E-16

Image 16
Contents MT1075/MT1065 Safety Cautions Fire and Shock Precautions Lamp ReplacementWhats in the Box? For North America only MT1065 onlyTable of Contents Introduction Features youll enjoyIntroduction to the Projector Attaching the lens cap Part Names of the ProjectorCarrying the Projector Top Features SelectTerminal Panel Features Part Names of the Remote Control On the screen using the SelectSelect Battery Installation Remote Control PrecautionsOperating Range for Wireless Remote Control Using the Remote Control in Wired OperationSetting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Distance Chart Do not attempt to install the projector yourselfThrow Distance and Screen Size Reflecting the ImageWhen Viewing a DVI Digital Signal Connecting Your PC or Macintosh ComputerConnecting to RGB 2 in connectors Connecting Your PC with a DVI ConnectorConnecting an External Monitor To connect Scart output RGBConnecting Your DVD Player DVD playerConnecting Your VCR or Laser Disc Player Connecting the Supplied Power CableProjecting AN Image Basic Operation Turning on the ProjectorAdjusting the Picture Size and Position Using the Remote ControlAdjust the Tilt Foot Selecting a SourceWhen using the remote control or cabinet buttons Using Auto FocusFocus Use the Focus Button +/- to obtain the best focusWhen using the USB connected to the projector Confirmation screen is displayedTurning Up or Down Volume Using the Laser PointerAdjusting the Image Using Auto Adjust Optimizing RGB Picture AutomaticallyTurning off the Projector Setting the function switchTo turn off the projector Convenient Features Using the Remote Mouse FunctionExecuting the Auto 3D Reform feature Auto 3D ReformSetting Screen of Auto 3D Reform AdjustmentFreezing a Picture Using the PointerGetting the On-line Help Operate the Menus using the USB mouse Using a USB Mouse Using the USB HUB FunctionUsing the middle button on the mouse Making Freehand Drawings on a Projected Image ChalkBoard Changing Background LogoUSB Memory Device or USB Memory Card Reader Support Using the Viewer Making the Most out of the Viewer FunctionOperating the Viewer Function from the Projector playback When the tool bar is not displayedProjecting slides Viewer Auto Play Mode Switching to Slides Directly from Other Input ModesViewing Digital Images PreparationsDeleting Captured Images Using the PC Card Files Fucntion PC Card FilesTo delete captured images Using ON-SCREEN Menu Using the MenusDefault Custom Menu items are Basic Menu OperationMenu tree Advanced MenuDefault Source Select Operation Mode SelectCommunication Speed WEP Menu Elements Menu Descriptions & Functions Entering Alphanumeric Characters by Using the MenuSource Select Entry Edit Command Picture not available for Viewer and LANSound Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup User can adjust the image display functions Hori Resolution manuallySelecting Lamp Mode and Lamp Type Lamp Setting Selecting Aspect Ratio and Position for Screen Screen Selecting Auto FunctionsSetting LAN Mode Network Type required for wireless onlyWEP for Wireless only Nications may be monitored by someoneUses 64-bit datalength for secure transmission Pared to use of 64bit datalength encryptionSetting a Password StatusEntry DeleteSecurity To enable Security, use the SelectTo delete PC card data you registered Tools Returning to Factory DefaultHelp Replacing the Lamp MaintenanceTo replace the lamp Cleaning Cleaning or Replacing the FilterCleaning the Cabinet and the Lens Vacuum the filter-through the filter coverTroubleshooting Power IndicatorStatus Indicator Lamp IndicatorImage isn’t square to Common Problems & Solutions Check These ItemsFor more information contact your dealer Page Specifications Model Number MT1075 OpticalModel Number MT1065 Optical Cabinet Dimensions Pin Assignments of D-Sub RGB Input ConnectorMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List PC Control Connector D-SUB 9P Using Software KeyboardPC Control Codes and Cable Connection Cable ConnectionOperation Using an Http Browser OverviewPreparation Before Use Handling of the Address for Operation via a BrowserTravelCare a service for international travelers Services offered with TravelCareTerm of warranty TravelCare GuideAsia and Middle East Kuala Lumpur, MalaysiaApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1065, MT1075 specifications

Kensington, a leader in innovative accessories for the digital workspace, has introduced two remarkable models: the MT1065 and MT1075. These devices are designed to enhance productivity and provide seamless connectivity in the modern office environment.

The Kensington MT1065 is specially engineered for professionals seeking a reliable and feature-rich solution for their connectivity needs. One of its main highlights is its versatility, as it supports multiple connections, including HDMI, USB-C, and VGA. This flexibility allows users to easily connect various devices, from laptops to projectors, and seamlessly transition between presentations or collaborative sessions.

With its compact and lightweight design, the MT1065 is ideal for on-the-go professionals. It fits easily into a backpack or laptop case, making it convenient for travel. Additionally, this model employs advanced video technology, supporting resolutions up to 4K, ensuring that presentations are crisp, clear, and visually engaging. The MT1065 also features Plug and Play capability, which means that users can set it up quickly without the need for additional software or drivers.

On the other hand, the Kensington MT1075 takes connectivity a step further by incorporating additional ports, including multiple USB-A and USB-C connections. This makes it a perfect choice for those who require extended connectivity options. It facilitates connection to numerous peripherals, such as external hard drives, keyboards, and mice, all while keeping the workspace organized and efficient.

The MT1075 also boasts advanced power delivery capabilities, enabling the user to charge their devices while maintaining high-performance data transfer simultaneously. This dual functionality helps in minimizing cable clutter, resulting in a cleaner and more organized workstation. Furthermore, it supports high-definition video output, making it suitable for video conferencing, online streaming, and graphic-intensive applications.

Both models feature a robust build quality, ensuring durability and longevity, vital in a bustling office environment. Kensington’s commitment to user-friendly design is evident in the easy-to-use interface and ergonomic layout, prompting users to maximize their productivity effectively.

In conclusion, whether opting for the Kensington MT1065 or the MT1075, users benefit from advanced connectivity options, enhanced power delivery, and a commitment to quality and performance. Both models encapsulate the essence of modern workspace needs, allowing professionals to work smarter and more efficiently in today’s digital age.