![](/images/new-backgrounds/1172456/17245639x1.webp)
NetTool Menus - PC
⇒Connect NetTool to a PC and select the PC icon. The icon displays on the left or right, depending on where you connected the cable.
⇒After the PC sends frames, you can scan the PC configuration by navigating through the menu. This view of the PC is invaluable in troubleshooting
networked PCs.
afq16s.bmp
Link Configuration![](/images/new-backgrounds/1172456/17245639xi3.webp)
Hey there, what’s your sign?
The link configuration screen provides the following key link information about the device to which NetTool is connected:
| afq15s.bmp |
Receive Pair | Polarity |
Advertised Speed | Advertised Duplex |
Actual Speed | Actual Duplex |
Level |
|
Health![](/images/new-backgrounds/1172456/17245639xi4.webp)
Don’t know why that PC seems a bit under the weather?
Check out the health of frames the PC has sent since you started AutoTest and isolate PC related problems.
Frames | Short Frames |
Broadcasts | Jabbers |
Errors | Collisions |
FCS (Frame |
|
Check Sum) |
|
afq35s.bmp
16