Emerson GXT5000R-208 user manual General Installation

Page 13

GENERAL INSTALLATION

1.Verify that the 30A input circuit breaker on the GXT5000R-208 is in the OFF position.

2.For GXT5VBATTW120 only - Connect the 208V, one-foot-long cord, from the rear of the GXT5000R-208 to the mating external battery connector on the rear of the GXT5VBATTW120.

3.Connect the L6-20P from the load to the L6-20R on the rear of the GXT5000R-208. Turn on the 20A circuit breaker on the rear of the GXT5000R-208.

4.Verify that the EPO connector and jumper are in place.

5.Connect any 120V loads to the 5-15R receptacles on the rear of the GXT5VBATTW120, if used. Verify that the 4A circuit protector is not tripped.

6.Connect the DC cable from the GXT5000R-208 to the first battery cabinet. If additional battery cabinets are used, connect each battery cabinet to the next using the 18-inch battery cable supplied with each additional cabinet.

7.Connect the input cord to the nearest L6-30 branch circuit receptacle.

The UPS is now ready to turn on. Power will be applied to the load (bypass mode) immediately whenever the input 30A circuit breaker is initially closed. Please refer to the Operating Instructions section of this manual before turning on the input circuit breaker.

9

Image 13
Contents GXT5000R-208 Page Table of Contents Figures Important Safety Instructions Service Personnel Information Glossary of Symbols Introduction and System Description Major Components Dynamic Bypass Auxiliary 120V / 400VA PowerGeneral Description DB-9 connector No user connectionControl panel Air vents External battery connectors GXT5VBATT battery cabinet Rear viewGeneral Installation Fault Indicator Battery capacity indicators Controls and IndicatorsOn Bypass indicator 1 amber LED Battery Mode Operation Normal Mode OperationModes of Operation Battery Recharge Mode Bypass ModeTurn On Operating InstructionsManual Bypass StandbyOptional Batteries Programmable RUN Time Programming the GXT5000R-208 for Battery Cabinet CountProcedure to change the battery count Procedure to confirm the battery countCommunications Pin ConfigurationRelay Interface Card Pin Function OperationEPO Serial Cable Serial CommunicationsDB-9 Adapter UPS Communications with Intellislot Maintenance Troubleshooting Battery mode Overvoltage faultOverload alarm Inverter modeDimensions inches mm SpecificationsWeight lbs kg GXT5VBATTW120 Battery Cabinet SpecificationsPage Page Asia 23F, Allied Kajima Bldg United States
Related manuals
Manual 32 pages 29.17 Kb

GXT5000R-208 specifications

The Emerson GXT5000R-208 is a high-performance uninterruptible power supply (UPS) designed to deliver reliable power protection for critical systems in data centers, industrial applications, and other mission-critical environments. This UPS is engineered for efficiency, redundancy, and performance, making it a trusted choice among IT professionals and facility managers.

One of the key features of the GXT5000R-208 is its double-conversion online technology. This technology ensures that the output power is consistent and free from fluctuations, providing pure sine wave output. This feature is particularly important for sensitive electronic equipment, as it maintains the integrity and operational stability of critical systems even in the event of input power disturbances such as surges, sags, or outages.

The GXT5000R-208 is capable of delivering a power capacity of 5000 VA / 5000 W with a nominal input voltage of 208-volt systems. Its advanced design allows for easy adaptability to various configurations, making it suitable for both single-phase and three-phase applications. The UPS is equipped with a wide input voltage range, which enhances its compatibility with different electrical infrastructures.

Another notable characteristic of the Emerson GXT5000R-208 is its modular design. The UPS can be easily expanded or reconfigured according to the changing needs of the facility, offering scalability for future growth. With hot-swappable batteries, users can perform maintenance or upgrades without downtime, ensuring continuous operation.

The GXT5000R-208 also incorporates powerful monitoring and management features. It comes with an intuitive LCD display that provides real-time information regarding the UPS status, battery health, and operational parameters. The UPS can also be integrated with various management software solutions, allowing for remote monitoring and control via SNMP, USB, or RS-232 connections.

Furthermore, the unit is built with a robust battery management system, ensuring optimal battery performance and longevity. Its intelligent charging system reduces the risk of battery overcharging, thus extending battery life and enhancing overall system reliability.

In summary, the Emerson GXT5000R-208 stands out for its reliable double-conversion online technology, scalability, and advanced monitoring capabilities. Its design prioritizes efficiency and adaptability, ensuring that organizations can maintain operational continuity and protect their critical systems against power disruptions. Whether in a data center or industrial setting, the GXT5000R-208 is a dependable UPS solution that meets the demanding requirements of modern power management.