Emerson GXT5000R-208 Controls and Indicators, Fault Indicator Battery capacity indicators

Page 14

CONTROLS AND INDICATORS

AC input

On Inverter

ON/Manual battery test

indicator

(Transfer to inverter)

indicator

 

 

1-35% 36-55% 56-75% 76-95% 96-100%

Fault

indicator Battery capacity indicators

 

 

1-35% 36-55%

56-75% 76-95% 96-105% OVERLOAD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

On bypass

 

 

 

Load level

Standby/Manual bypass

indicator

 

 

 

indicators

(Transfer to bypass)

 

 

 

 

 

ON/Manual Battery Test button

This button controls output power to connected load(s) and has two functions:

• Transfer load to inverter

• Manual battery test

Pressing the ON/Manual Battery Test button will transfer the load from bypass to inverter in order to provide conditioned and protected power to the output power

receptacles. If the output is turned off using the Standby button

, pressing the ON

button will restart the load directly from the inverter.

 

To initiate a manual battery test, press the ON/Manual Battery Test button for at least one second while operating from utility power and no alarm conditions are present.

The manual battery test should be initiated with fully charged batteries (all Battery Capacity LEDs on). The Battery Capacity LEDs will flash during the battery test.

Standby/Manual Bypass button

This button controls output power to connected load(s) and has dual functions:

• Standby

•Manual bypass

!CAUTION

Pressing the Standby/Manual Bypass button during normal operation while the inverter is on will transfer the load to bypass power, if the bypass voltage and frequency are within a safe range.

Pressing the Standby/Manual Bypass button when the UPS is in bypass mode will shut off power to the output receptacles and connected loads. Turning the unit off leaves the UPS in standby mode. To fully isolate the load from power, open the input circuit breaker.

10

Page 13 Page 15
Image 14
Page 13 Page 15
Contents GXT5000R-208 Page Table of Contents Figures Important Safety Instructions Service Personnel Information Glossary of Symbols Introduction and System Description Major Components Auxiliary 120V / 400VA Power Dynamic BypassControl panel Air vents DB-9 connector No user connectionGeneral Description GXT5VBATT battery cabinet Rear view External battery connectorsGeneral Installation Controls and Indicators Fault Indicator Battery capacity indicatorsOn Bypass indicator 1 amber LED Modes of Operation Normal Mode OperationBattery Mode Operation Bypass Mode Battery Recharge ModeManual Bypass Operating InstructionsTurn On StandbyProgramming the GXT5000R-208 for Battery Cabinet Count Optional Batteries Programmable RUN TimeProcedure to confirm the battery count Procedure to change the battery countRelay Interface Card Pin ConfigurationCommunications Pin Function OperationEPO DB-9 Adapter Serial CommunicationsSerial Cable UPS Communications with Intellislot Maintenance Troubleshooting Overload alarm Overvoltage faultBattery mode Inverter modeWeight lbs kg SpecificationsDimensions inches mm Battery Cabinet Specifications GXT5VBATTW120Page Page United States Asia 23F, Allied Kajima Bldg
Related manuals
Manual 32 pages 29.17 Kb

GXT5000R-208 specifications

The Emerson GXT5000R-208 is a high-performance uninterruptible power supply (UPS) designed to deliver reliable power protection for critical systems in data centers, industrial applications, and other mission-critical environments. This UPS is engineered for efficiency, redundancy, and performance, making it a trusted choice among IT professionals and facility managers.

One of the key features of the GXT5000R-208 is its double-conversion online technology. This technology ensures that the output power is consistent and free from fluctuations, providing pure sine wave output. This feature is particularly important for sensitive electronic equipment, as it maintains the integrity and operational stability of critical systems even in the event of input power disturbances such as surges, sags, or outages.

The GXT5000R-208 is capable of delivering a power capacity of 5000 VA / 5000 W with a nominal input voltage of 208-volt systems. Its advanced design allows for easy adaptability to various configurations, making it suitable for both single-phase and three-phase applications. The UPS is equipped with a wide input voltage range, which enhances its compatibility with different electrical infrastructures.

Another notable characteristic of the Emerson GXT5000R-208 is its modular design. The UPS can be easily expanded or reconfigured according to the changing needs of the facility, offering scalability for future growth. With hot-swappable batteries, users can perform maintenance or upgrades without downtime, ensuring continuous operation.

The GXT5000R-208 also incorporates powerful monitoring and management features. It comes with an intuitive LCD display that provides real-time information regarding the UPS status, battery health, and operational parameters. The UPS can also be integrated with various management software solutions, allowing for remote monitoring and control via SNMP, USB, or RS-232 connections.

Furthermore, the unit is built with a robust battery management system, ensuring optimal battery performance and longevity. Its intelligent charging system reduces the risk of battery overcharging, thus extending battery life and enhancing overall system reliability.

In summary, the Emerson GXT5000R-208 stands out for its reliable double-conversion online technology, scalability, and advanced monitoring capabilities. Its design prioritizes efficiency and adaptability, ensuring that organizations can maintain operational continuity and protect their critical systems against power disruptions. Whether in a data center or industrial setting, the GXT5000R-208 is a dependable UPS solution that meets the demanding requirements of modern power management.
Top Page Image Contents