Emerson 4000, 7000 appendix Settings Overview

Overview 1--2

Settings Overview

SETTINGS

The controller settings can be displayed and changed from the keypad. Some settings may require a password (if the controller is set up for one).

From the ATS Status display, press Enter/Save Settings ￿ key to move to the Settings level of menus.

Press the right arrow key " to see the eight parameter information headings (as shown below). An overview of each setting is listed below. The detailed menus for each setting are on the following pages.

8 Parameter Menus (loop back to beginning)

SETTINGS	SETTINGS	SETTINGS
Voltage DO PU	Time Delays	Features
Frequency DO PU

SETTINGSSETTINGS

General Engine Exerciser

VIEW	SERVICE	SERVICE
Event Log	Statistics	Factory
	Diagnostics	Selectable Features
	Voltage and Frequency Settings	see page 2–2

CP settings and Normal & Emergency voltage and frequency pickup & dropout.

Time Delay Settings see page 2–4

Bypass running time delay, and settings for all standard time delays.

Features Settings see page 2–6

Commit on transfer, shed load, phase rotation, and inphase monitor settings.

General Settings see page 2–8

Reset settings, language, communication, logging, and password.

Engine Exerciser Settings see page 2–10

Present date and time, seven exercise programs each with six parameters.

View Event Log see page 2–12

Last 99 events in date and time order; six types and seven reasons are logged.

Service Statistics/Diagnostics, Factory Selectable Features

For factory service use only. see pages 2–13